FAG B7001-C-T-P4S Bearing

FAG B7001-C-T-P4S spindle bearings | 12x28x8mm

Also known as : B7001-C-T-P4S

  • Inside Diameter: 12 mm
  • Outside Diameter: 28 mm
  • Width: 8 mm
  • Basic dynamic load rating: 4.65 kN
  • Basic static load rating: 1.83 kN

Inquire Now

FAG B7001-C-T-P4S Bearing

FAG B7001-C-T-P4S Bearing details

Number B7001-C-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 12 mm   
D 28 mm   
B 8 mm   
a 6,7 mm   
Da 24,5 mm  Tolerance: H12
da 16,5 mm  Tolerance: h12
Etk max 18,8 mm   
Etk min 17,9 mm   
Etk1 max 18,8 mm   
Etk1 min 17,9 mm   
r1 min 0,3 mm   
ra max 0,3 mm   
ra1 max 0,1 mm   
rmin 0,3 mm   
α 15 °  Contact angle
m 0,023 kg  ≈ Mass
Cr 4650 N  Basic dynamic load rating, radial
C0r 1830 N  Basic static load rating, radial
Cur 188 N  Fatigue limit load, radial
nG Fett 60000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 90000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 19 N  Preload force
FV M 73 N  Preload force
FV H 152 N  Preload force
KaE L 59 N  Lift-off force
KaE M 242 N  Lift-off force
KaE H 543 N  Lift-off force
ca L 14,6 N/µm  Axial rigidity
ca M 26,5 N/µm  Axial rigidity
ca H 38,7 N/µm  Axial rigidity

Nodes bearings have FAG B7001-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B7001-C-T-P4S bearing cross reference

FAG spindle bearings

Related Information

Product search