FAG B7034-C-T-P4S spindle bearings | 170x260x42mm
Also known as : B7034-C-T-P4S
- Inside Diameter: 170 mm
- Outside Diameter: 260 mm
- Width: 42 mm
- Basic dynamic load rating: 241 kN
- Basic static load rating: 189 kN
FAG B7034-C-T-P4S Bearing
FAG B7034-C-T-P4S Bearing details
| Number | B7034-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 170 mm | |
| D | 260 mm | |
| B | 42 mm | |
| a | 49,8 mm | |
| Da | 246 mm | Tolerance: H12 |
| da | 185 mm | Tolerance: h12 |
| Etk max | 206,9 mm | |
| Etk min | 195,9 mm | |
| Etk1 max | 206,9 mm | |
| Etk1 min | 195,9 mm | |
| r1 min | 2,1 mm | |
| ra max | 2,1 mm | |
| ra1 max | 1 mm | |
| rmin | 2,1 mm | |
| α | 15 ° | Contact angle |
| m | 6,52 kg | ≈ Mass |
| Cr | 241000 N | Basic dynamic load rating, radial |
| C0r | 189000 N | Basic static load rating, radial |
| Cur | 13300 N | Fatigue limit load, radial |
| nG Fett | 5300 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 8000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1448 N | Preload force |
| FV M | 4488 N | Preload force |
| FV H | 8919 N | Preload force |
| KaE L | 4439 N | Lift-off force |
| KaE M | 14768 N | Lift-off force |
| KaE H | 31222 N | Lift-off force |
| ca L | 171 N/µm | Axial rigidity |
| ca M | 282 N/µm | Axial rigidity |
| ca H | 397 N/µm | Axial rigidity |
Nodes bearings have FAG B7034-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B7034-C-T-P4S bearing cross reference
FAG B71934-C-T-P4S bearing
170mm x 230mm x 28mm
FAG B7234-C-T-P4S bearing
170mm x 310mm x 52mm
FAG B7034-E-T-P4S bearing
170mm x 260mm x 42mm
FAG B71934-E-T-P4S bearing
170mm x 230mm x 28mm