FAG B7034-E-T-P4S spindle bearings | 170x260x42mm
Also known as : B7034-E-T-P4S
- Inside Diameter: 170 mm
- Outside Diameter: 260 mm
- Width: 42 mm
- Basic dynamic load rating: 229 kN
- Basic static load rating: 180 kN
FAG B7034-E-T-P4S Bearing
FAG B7034-E-T-P4S Bearing details
| Number | B7034-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 170 mm | |
| D | 260 mm | |
| B | 42 mm | |
| a | 71,1 mm | |
| Da | 246 mm | Tolerance: H12 |
| da | 185 mm | Tolerance: h12 |
| Etk max | 206,9 mm | |
| Etk min | 195,9 mm | |
| Etk1 max | 206,9 mm | |
| Etk1 min | 195,9 mm | |
| r1 min | 2,1 mm | |
| ra max | 2,1 mm | |
| ra1 max | 1 mm | |
| rmin | 2,1 mm | |
| α | 25 ° | Contact angle |
| m | 6,49 kg | ≈ Mass |
| Cr | 229000 N | Basic dynamic load rating, radial |
| C0r | 180000 N | Basic static load rating, radial |
| Cur | 12600 N | Fatigue limit load, radial |
| nG Fett | 4500 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 7000 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 2250 N | Preload force |
| FV M | 7240 N | Preload force |
| FV H | 14802 N | Preload force |
| KaE L | 6541 N | Lift-off force |
| KaE M | 21677 N | Lift-off force |
| KaE H | 45639 N | Lift-off force |
| ca L | 409 N/µm | Axial rigidity |
| ca M | 635 N/µm | Axial rigidity |
| ca H | 848 N/µm | Axial rigidity |
Nodes bearings have FAG B7034-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.
FAG B7034-E-T-P4S bearing cross reference
FAG B7034-C-T-P4S bearing
170mm x 260mm x 42mm
FAG B71934-C-T-P4S bearing
170mm x 230mm x 28mm
FAG B7234-C-T-P4S bearing
170mm x 310mm x 52mm
FAG B71934-E-T-P4S bearing
170mm x 230mm x 28mm