FAG B7040-C-T-P4S spindle bearings | 200x310x51mm
Also known as : B7040-C-T-P4S
- Inside Diameter: 200 mm
- Outside Diameter: 310 mm
- Width: 51 mm
- Basic dynamic load rating: 310 kN
- Basic static load rating: 270 kN
FAG B7040-C-T-P4S Bearing
FAG B7040-C-T-P4S Bearing details
| Number | B7040-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 200 mm | |
| D | 310 mm | |
| B | 51 mm | |
| a | 59,7 mm | |
| Da | 293 mm | Tolerance: H12 |
| da | 217 mm | Tolerance: h12 |
| Etk max | 245,4 mm | |
| Etk min | 232,1 mm | |
| Etk1 max | 245,4 mm | |
| Etk1 min | 232,1 mm | |
| r1 min | 2,1 mm | |
| ra max | 2,1 mm | |
| ra1 max | 1 mm | |
| rmin | 2,1 mm | |
| α | 15 ° | Contact angle |
| m | 11,6 kg | ≈ Mass |
| Cr | 310000 N | Basic dynamic load rating, radial |
| C0r | 270000 N | Basic static load rating, radial |
| Cur | 17500 N | Fatigue limit load, radial |
| nG Fett | 4300 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 6700 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1791 N | Preload force |
| FV M | 5681 N | Preload force |
| FV H | 11402 N | Preload force |
| KaE L | 5451 N | Lift-off force |
| KaE M | 18508 N | Lift-off force |
| KaE H | 39448 N | Lift-off force |
| ca L | 192 N/µm | Axial rigidity |
| ca M | 318 N/µm | Axial rigidity |
| ca H | 448 N/µm | Axial rigidity |
Nodes bearings have FAG B7040-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B7040-C-T-P4S bearing cross reference
FAG B71940-C-T-P4S bearing
200mm x 280mm x 38mm
FAG B7240-C-T-P4S bearing
200mm x 360mm x 58mm
FAG B7040-E-T-P4S bearing
200mm x 310mm x 51mm
FAG B71940-E-T-P4S bearing
200mm x 280mm x 38mm