FAG B7240-E-T-P4S spindle bearings | 200x360x58mm
Also known as : B7240-E-T-P4S
- Inside Diameter: 200 mm
- Outside Diameter: 360 mm
- Width: 58 mm
- Basic dynamic load rating: 315 kN
- Basic static load rating: 295 kN
FAG B7240-E-T-P4S Bearing
FAG B7240-E-T-P4S Bearing details
| Number | B7240-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 200 mm | |
| D | 360 mm | |
| B | 58 mm | |
| a | 94,3 mm | |
| Da | 321,5 mm | Tolerance: H12 |
| da | 238,5 mm | Tolerance: h12 |
| Etk max | 270,1 mm | |
| Etk min | 257,1 mm | |
| Etk1 max | 270,1 mm | |
| Etk1 min | 257,1 mm | |
| r1 min | 4 mm | |
| ra max | 3 mm | |
| ra1 max | 3 mm | |
| rmin | 4 mm | |
| α | 25 ° | Contact angle |
| m | 24,2 kg | ≈ Mass |
| Cr | 315000 N | Basic dynamic load rating, radial |
| C0r | 295000 N | Basic static load rating, radial |
| Cur | 18000 N | Fatigue limit load, radial |
| nG Fett | 3000 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 4500 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 2882 N | Preload force |
| FV M | 9666 N | Preload force |
| FV H | 20030 N | Preload force |
| KaE L | 8349 N | Lift-off force |
| KaE M | 28771 N | Lift-off force |
| KaE H | 61275 N | Lift-off force |
| ca L | 503 N/µm | Axial rigidity |
| ca M | 789 N/µm | Axial rigidity |
| ca H | 1055 N/µm | Axial rigidity |
Nodes bearings have FAG B7240-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.
FAG B7240-E-T-P4S bearing cross reference
FAG B7040-C-T-P4S bearing
200mm x 310mm x 51mm
FAG B71940-C-T-P4S bearing
200mm x 280mm x 38mm
FAG B7240-C-T-P4S bearing
200mm x 360mm x 58mm
FAG B7040-E-T-P4S bearing
200mm x 310mm x 51mm
