FAG B71932-E-T-P4S spindle bearings | 160x220x28mm
Also known as : B71932-E-T-P4S
- Inside Diameter: 160 mm
- Outside Diameter: 220 mm
- Width: 28 mm
- Basic dynamic load rating: 121 kN
- Basic static load rating: 100 kN
FAG B71932-E-T-P4S Bearing
FAG B71932-E-T-P4S Bearing details
| Number | B71932-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 160 mm | |
| D | 220 mm | |
| B | 28 mm | |
| a | 58,3 mm | |
| Da | 209 mm | Tolerance: H12 |
| da | 170 mm | Tolerance: h12 |
| Etk max | 184,7 mm | |
| Etk min | 179,5 mm | |
| Etk1 max | 184,7 mm | |
| Etk1 min | 179,5 mm | |
| r1 min | 1 mm | |
| ra max | 1 mm | |
| ra1 max | 1 mm | |
| rmin | 2 mm | |
| α | 25 ° | Contact angle |
| m | 2,62 kg | ≈ Mass |
| Cr | 121000 N | Basic dynamic load rating, radial |
| C0r | 100000 N | Basic static load rating, radial |
| Cur | 7500 N | Fatigue limit load, radial |
| nG Fett | 5300 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 8000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1055 N | Preload force |
| FV M | 3579 N | Preload force |
| FV H | 7439 N | Preload force |
| KaE L | 3062 N | Lift-off force |
| KaE M | 10696 N | Lift-off force |
| KaE H | 22899 N | Lift-off force |
| ca L | 341 N/µm | Axial rigidity |
| ca M | 539 N/µm | Axial rigidity |
| ca H | 725 N/µm | Axial rigidity |
Nodes bearings have FAG B71932-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.
FAG B71932-E-T-P4S bearing cross reference
FAG B7032-C-T-P4S bearing
160mm x 240mm x 38mm
FAG B71932-C-T-P4S bearing
160mm x 220mm x 28mm
FAG B7232-C-T-P4S bearing
160mm x 290mm x 48mm
FAG B7032-E-T-P4S bearing
160mm x 240mm x 38mm