FAG B7232-E-T-P4S spindle bearings | 160x290x48mm
Also known as : B7232-E-T-P4S
- Inside Diameter: 160 mm
- Outside Diameter: 290 mm
- Width: 48 mm
- Basic dynamic load rating: 236 kN
- Basic static load rating: 192 kN
FAG B7232-E-T-P4S Bearing
FAG B7232-E-T-P4S Bearing details
| Number | B7232-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 160 mm | |
| D | 290 mm | |
| B | 48 mm | |
| a | 76,5 mm | |
| Da | 259 mm | Tolerance: H12 |
| da | 191 mm | Tolerance: h12 |
| Etk max | 216,9 mm | |
| Etk min | 205,9 mm | |
| Etk1 max | 216,9 mm | |
| Etk1 min | 205,9 mm | |
| r1 min | 3 mm | |
| ra max | 2,5 mm | |
| ra1 max | 2,5 mm | |
| rmin | 3 mm | |
| α | 25 ° | Contact angle |
| m | 12,9 kg | ≈ Mass |
| Cr | 236000 N | Basic dynamic load rating, radial |
| C0r | 192000 N | Basic static load rating, radial |
| Cur | 13200 N | Fatigue limit load, radial |
| nG Fett | 3800 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 5600 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 2326 N | Preload force |
| FV M | 7493 N | Preload force |
| FV H | 15324 N | Preload force |
| KaE L | 6760 N | Lift-off force |
| KaE M | 22418 N | Lift-off force |
| KaE H | 47204 N | Lift-off force |
| ca L | 429 N/µm | Axial rigidity |
| ca M | 665 N/µm | Axial rigidity |
| ca H | 888 N/µm | Axial rigidity |
Nodes bearings have FAG B7232-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.
FAG B7232-E-T-P4S bearing cross reference
FAG B7032-C-T-P4S bearing
160mm x 240mm x 38mm
FAG B71932-C-T-P4S bearing
160mm x 220mm x 28mm
FAG B7232-C-T-P4S bearing
160mm x 290mm x 48mm
FAG B7032-E-T-P4S bearing
160mm x 240mm x 38mm