FAG HS7011-C-T-P4S Bearing

FAG HS7011-C-T-P4S spindle bearings | 55x90x18mm

Also known as : HS7011-C-T-P4S

• Inside Diameter: 55 mm
• Outside Diameter: 90 mm
• Width: 18 mm
• Basic dynamic load rating: 17.9 kN
• Basic static load rating: 11.5 kN

Inquire Now

FAG HS7011-C-T-P4S Bearing

Number	HS7011-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	55 mm
D	90 mm
B	18 mm
a	18,7 mm
Da	83 mm	Tolerance: H12
da	62 mm	Tolerance: h12
Etk max	70,3 mm
Etk min	68,5 mm
Etk1 max	70,3 mm
Etk1 min	65,9 mm
r1 min	1,1 mm
ra max	1 mm
ra1 max	0,6 mm
rmin	1,1 mm
α	15 °	Contact angle
m	0,405 kg	≈ Mass
Cr	17900 N	Basic dynamic load rating, radial
C0r	11500 N	Basic static load rating, radial
Cur	1180 N	Fatigue limit load, radial
nG Fett	22000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	34000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	62 N	Preload force
FV M	187 N	Preload force
FV H	374 N	Preload force
KaE L	187 N	Lift-off force
KaE M	588 N	Lift-off force
KaE H	1225 N	Lift-off force
ca L	42,2 N/µm	Axial rigidity
ca M	66,5 N/µm	Axial rigidity
ca H	91,1 N/µm	Axial rigidity

Nodes bearings have FAG HS7011-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.