FAG HS71901-C-T-P4S Bearing

FAG HS71901-C-T-P4S spindle bearings | 12x24x6mm

Also known as : HS71901-C-T-P4S

  • Inside Diameter: 12 mm
  • Outside Diameter: 24 mm
  • Width: 6 mm
  • Basic dynamic load rating: 1.85 kN
  • Basic static load rating: 0.72 kN

Inquire Now

FAG HS71901-C-T-P4S Bearing

FAG HS71901-C-T-P4S Bearing details

Number HS71901-C-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
 
d 12 mm   
D 24 mm   
B 6 mm   
a 5,4 mm   
Da 21,5 mm  Tolerance: H12
da 15 mm  Tolerance: h12
Etk max 17 mm   
Etk min 16,6 mm   
Etk1 max 17 mm   
Etk1 min 15,7 mm   
r1 min 0,3 mm   
ra max 0,3 mm   
ra1 max 0,1 mm   
rmin 0,3 mm   
α 15 °  Contact angle
m 0,011 kg  ≈ Mass
Cr 1850 N  Basic dynamic load rating, radial
C0r 720 N  Basic static load rating, radial
Cur 74 N  Fatigue limit load, radial
nG Fett 90000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 140000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 7 N  Preload force
FV M 21 N  Preload force
FV H 41 N  Preload force
KaE L 21 N  Lift-off force
KaE M 66 N  Lift-off force
KaE H 137 N  Lift-off force
ca L 9,4 N/µm  Axial rigidity
ca M 15 N/µm  Axial rigidity
ca H 20,8 N/µm  Axial rigidity

Nodes bearings have FAG HS71901-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG HS71901-C-T-P4S bearing cross reference

NSK 7901C bearing
12mm x 24mm x 6mm
NSK 7901CDB bearing
12mm x 24mm x 6mm
NSK 7901CDF bearing
12mm x 24mm x 6mm
NSK 7901A5DT bearing
12mm x 24mm x 6mm
NSK 7901CDT bearing
12mm x 24mm x 6mm
FAG B7001-C-T-P4S bearing
12mm x 28mm x 8mm
FAG B7201-C-T-P4S bearing
12mm x 32mm x 10mm
FAG B7001-E-T-P4S bearing
12mm x 28mm x 8mm
FAG B7201-E-T-P4S bearing
12mm x 32mm x 10mm

FAG spindle bearings

Related Information

Product search