FAG HS71916-C-T-P4S Bearing

FAG HS71916-C-T-P4S spindle bearings | 80x110x16mm

Also known as : HS71916-C-T-P4S

• Inside Diameter: 80 mm
• Outside Diameter: 110 mm
• Width: 16 mm
• Basic dynamic load rating: 20.3 kN
• Basic static load rating: 15.5 kN

Inquire Now

FAG HS71916-C-T-P4S Bearing

Number	HS71916-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	80 mm
D	110 mm
B	16 mm
a	20,7 mm
Da	104 mm	Tolerance: H12
da	86 mm	Tolerance: h12
Etk max	92,5 mm
Etk min	91 mm
Etk1 max	92,5 mm
Etk1 min	88,5 mm
r1 min	1 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,379 kg	≈ Mass
Cr	20300 N	Basic dynamic load rating, radial
C0r	15500 N	Basic static load rating, radial
Cur	1590 N	Fatigue limit load, radial
nG Fett	17000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	26000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	71 N	Preload force
FV M	213 N	Preload force
FV H	426 N	Preload force
KaE L	212 N	Lift-off force
KaE M	666 N	Lift-off force
KaE H	1385 N	Lift-off force
ca L	52,3 N/µm	Axial rigidity
ca M	81,9 N/µm	Axial rigidity
ca H	112 N/µm	Axial rigidity

Nodes bearings have FAG HS71916-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.