FAG B71916-C-T-P4S Bearing

FAG B71916-C-T-P4S spindle bearings | 80x110x16mm

Also known as : B71916-C-T-P4S

• Inside Diameter: 80 mm
• Outside Diameter: 110 mm
• Width: 16 mm
• Basic dynamic load rating: 35.5 kN
• Basic static load rating: 25.5 kN

Inquire Now

FAG B71916-C-T-P4S Bearing

Number	B71916-C-T-P4S
Type	FAG spindle bearings, adjusted, in pairs or sets
d	80 mm
D	110 mm
B	16 mm
a	20,7 mm
Da	104 mm	Tolerance: H12
da	86 mm	Tolerance: h12
Etk max	92,2 mm
Etk min	89,3 mm
Etk1 max	92,2 mm
Etk1 min	89,3 mm
r1 min	1 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,366 kg	≈ Mass
Cr	35500 N	Basic dynamic load rating, radial
C0r	25500 N	Basic static load rating, radial
Cur	2600 N	Fatigue limit load, radial
nG Fett	12000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	19000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	174 N	Preload force
FV M	591 N	Preload force
FV H	1206 N	Preload force
KaE L	532 N	Lift-off force
KaE M	1954 N	Lift-off force
KaE H	4257 N	Lift-off force
ca L	69,9 N/µm	Axial rigidity
ca M	121 N/µm	Axial rigidity
ca H	173 N/µm	Axial rigidity

Nodes bearings have FAG B71916-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.