FAG B71916-C-2RSD-T-P4S Bearing

FAG B71916-C-2RSD-T-P4S spindle bearings | 80x110x16mm

Also known as : B71916-C-2RSD-T-P4S

  • Inside Diameter: 80 mm
  • Outside Diameter: 110 mm
  • Width: 16 mm
  • Basic dynamic load rating: 35.5 kN
  • Basic static load rating: 25.5 kN

Inquire Now

FAG B71916-C-2RSD-T-P4S Bearing

FAG B71916-C-2RSD-T-P4S Bearing details

Number B71916-C-2RSD-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 80 mm   
D 110 mm   
B 16 mm   
a 20,7 mm   
Da 104 mm  Tolerance: H12
da 86 mm  Tolerance: h12
r1 min 1 mm   
ra max 0,6 mm   
ra1 max 0,3 mm   
rmin 1 mm   
α 15 °  Contact angle
m 0,364 kg  ≈ Mass
Cr 35500 N  Basic dynamic load rating, radial
C0r 25500 N  Basic static load rating, radial
Cur 2600 N  Fatigue limit load, radial
nG Fett 12000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 174 N  Preload force
FV M 591 N  Preload force
FV H 1206 N  Preload force
KaE L 532 N  Lift-off force
KaE M 1954 N  Lift-off force
KaE H 4257 N  Lift-off force
ca L 69,9 N/µm  Axial rigidity
ca M 121 N/µm  Axial rigidity
ca H 173 N/µm  Axial rigidity

Nodes bearings have FAG B71916-C-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG B71916-C-2RSD-T-P4S bearing cross reference

FAG B7016-C-T-P4S bearing
80mm x 125mm x 22mm
FAG B71916-C-T-P4S bearing
80mm x 110mm x 16mm
FAG B7216-C-T-P4S bearing
80mm x 140mm x 26mm
FAG B7016-E-T-P4S bearing
80mm x 125mm x 22mm
FAG B71916-E-T-P4S bearing
80mm x 110mm x 16mm
FAG B7216-E-T-P4S bearing
80mm x 140mm x 26mm
FAG HS7016-C-T-P4S bearing
80mm x 125mm x 22mm
FAG HS71916-C-T-P4S bearing
80mm x 110mm x 16mm
FAG HS7016-E-T-P4S bearing
80mm x 125mm x 22mm

FAG spindle bearings

Related Information

Product search