FAG HSS7001-E-T-P4S Bearing

FAG HSS7001-E-T-P4S spindle bearings | 12x28x8mm

Also known as : HSS7001-E-T-P4S

  • Inside Diameter: 12 mm
  • Outside Diameter: 28 mm
  • Width: 8 mm
  • Basic dynamic load rating: 2.32 kN
  • Basic static load rating: 0.91 kN

Inquire Now

FAG HSS7001-E-T-P4S Bearing

FAG HSS7001-E-T-P4S Bearing details

Number HSS7001-E-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances
 
d 12 mm   
D 28 mm   
B 8 mm   
a 8,7 mm   
Da 24,5 mm  Tolerance: H12
da 16,5 mm  Tolerance: h12
r1 min 0,3 mm   
ra max 0,3 mm   
ra1 max 0,1 mm   
rmin 0,3 mm   
α 25 °  Contact angle
m 0,026 kg  ≈ Mass
Cr 2320 N  Basic dynamic load rating, radial
C0r 910 N  Basic static load rating, radial
Cur 94 N  Fatigue limit load, radial
nG Fett 75000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 15 N  Preload force
FV M 44 N  Preload force
FV H 88 N  Preload force
KaE L 43 N  Lift-off force
KaE M 131 N  Lift-off force
KaE H 268 N  Lift-off force
ca L 26,7 N/µm  Axial rigidity
ca M 40 N/µm  Axial rigidity
ca H 52,6 N/µm  Axial rigidity

Nodes bearings have FAG HSS7001-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS7001-E-T-P4S bearing cross reference

NSK 7001C bearing
12mm x 28mm x 8mm
NSK 7001A bearing
12mm x 28mm x 8mm
NSK 7001CDB bearing
12mm x 28mm x 8mm
NSK 7001ADF bearing
12mm x 28mm x 8mm
NSK 7001CDF bearing
12mm x 28mm x 8mm
NSK 7001ADT bearing
12mm x 28mm x 8mm
NSK 7001CDT bearing
12mm x 28mm x 8mm
FAG B7001-C-T-P4S bearing
12mm x 28mm x 8mm
FAG B7201-C-T-P4S bearing
12mm x 32mm x 10mm
FAG B7001-E-T-P4S bearing
12mm x 28mm x 8mm

FAG spindle bearings

Related Information

Product search