FAG HSS7010-C-T-P4S Bearing

FAG HSS7010-C-T-P4S spindle bearings | 50x80x16mm

Also known as : HSS7010-C-T-P4S

  • Inside Diameter: 50 mm
  • Outside Diameter: 80 mm
  • Width: 16 mm
  • Basic dynamic load rating: 12.8 kN
  • Basic static load rating: 8.2 kN

Inquire Now


FAG HSS7010-C-T-P4S Bearing

FAG HSS7010-C-T-P4S Bearing details

Number HSS7010-C-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
 
d 50 mm   
D 80 mm   
B 16 mm   
a 16,7 mm   
Da 74 mm  Tolerance: H12
da 56 mm  Tolerance: h12
r1 min 1 mm   
ra max 1 mm   
ra1 max 0,3 mm   
rmin 1 mm   
α 15 °  Contact angle
m 0,314 kg  ≈ Mass
Cr 12800 N  Basic dynamic load rating, radial
C0r 8200 N  Basic static load rating, radial
Cur 840 N  Fatigue limit load, radial
nG Fett 24000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 45 N  Preload force
FV M 135 N  Preload force
FV H 269 N  Preload force
KaE L 135 N  Lift-off force
KaE M 424 N  Lift-off force
KaE H 884 N  Lift-off force
ca L 36,4 N/µm  Axial rigidity
ca M 57,4 N/µm  Axial rigidity
ca H 78,8 N/µm  Axial rigidity

Nodes bearings have FAG HSS7010-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS7010-C-T-P4S bearing cross reference

NSK 7010C bearing
50mm x 80mm x 16mm
NSK 7010A bearing
50mm x 80mm x 16mm
NSK 7010ADB bearing
50mm x 80mm x 16mm
NSK 7010ADF bearing
50mm x 80mm x 16mm
NSK 7010CDF bearing
50mm x 80mm x 16mm
NSK 7010ADT bearing
50mm x 80mm x 16mm
NSK 7010CDT bearing
50mm x 80mm x 16mm
FAG B7010-C-T-P4S bearing
50mm x 80mm x 16mm
FAG B71910-C-T-P4S bearing
50mm x 72mm x 12mm
FAG B7210-C-T-P4S bearing
50mm x 90mm x 20mm
FAG B7010-E-T-P4S bearing
50mm x 80mm x 16mm
FAG B71910-E-T-P4S bearing
50mm x 72mm x 12mm

FAG spindle bearings

Related Information

Product search