FAG HSS71906-C-T-P4S Bearing

FAG HSS71906-C-T-P4S spindle bearings | 30x47x9mm

Also known as : HSS71906-C-T-P4S

  • Inside Diameter: 30 mm
  • Outside Diameter: 47 mm
  • Width: 9 mm
  • Basic dynamic load rating: 5.9 kN
  • Basic static load rating: 3.1 kN

Inquire Now

FAG HSS71906-C-T-P4S Bearing

FAG HSS71906-C-T-P4S Bearing details

Number HSS71906-C-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
 
d 30 mm   
D 47 mm   
B 9 mm   
a 9,7 mm   
Da 43,5 mm  Tolerance: H12
da 34 mm  Tolerance: h12
r1 min 0,3 mm   
ra max 0,3 mm   
ra1 max 0,15 mm   
rmin 0,3 mm   
α 15 °  Contact angle
m 0,058 kg  ≈ Mass
Cr 5900 N  Basic dynamic load rating, radial
C0r 3100 N  Basic static load rating, radial
Cur 320 N  Fatigue limit load, radial
nG Fett 43000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 21 N  Preload force
FV M 64 N  Preload force
FV H 129 N  Preload force
KaE L 65 N  Lift-off force
KaE M 204 N  Lift-off force
KaE H 425 N  Lift-off force
ca L 21,3 N/µm  Axial rigidity
ca M 33,8 N/µm  Axial rigidity
ca H 46,5 N/µm  Axial rigidity

Nodes bearings have FAG HSS71906-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71906-C-T-P4S bearing cross reference

NSK 7906C bearing
30mm x 47mm x 9mm
NSK 7906CDB bearing
30mm x 47mm x 9mm
NSK 7906CDF bearing
30mm x 47mm x 9mm
NSK 7906A5DT bearing
30mm x 47mm x 9mm
NSK 7906CDT bearing
30mm x 47mm x 9mm
FAG B7006-C-T-P4S bearing
30mm x 55mm x 13mm
FAG B7206-C-T-P4S bearing
30mm x 62mm x 16mm
FAG B7006-E-T-P4S bearing
30mm x 55mm x 13mm
FAG B7206-E-T-P4S bearing
30mm x 62mm x 16mm

FAG spindle bearings

Related Information

Product search