FAG HSS71909-E-T-P4S Bearing

FAG HSS71909-E-T-P4S spindle bearings | 45x68x12mm

Also known as : HSS71909-E-T-P4S

  • Inside Diameter: 45 mm
  • Outside Diameter: 68 mm
  • Width: 12 mm
  • Basic dynamic load rating: 9.1 kN
  • Basic static load rating: 5.6 kN

Inquire Now

FAG HSS71909-E-T-P4S Bearing

FAG HSS71909-E-T-P4S Bearing details

Number HSS71909-E-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances
 
d 45 mm   
D 68 mm   
B 12 mm   
a 19,2 mm   
Da 63,5 mm  Tolerance: H12
da 50 mm  Tolerance: h12
r1 min 0,6 mm   
ra max 0,6 mm   
ra1 max 0,15 mm   
rmin 0,6 mm   
α 25 °  Contact angle
m 0,147 kg  ≈ Mass
Cr 9100 N  Basic dynamic load rating, radial
C0r 5600 N  Basic static load rating, radial
Cur 580 N  Fatigue limit load, radial
nG Fett 26000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 55 N  Preload force
FV M 164 N  Preload force
FV H 328 N  Preload force
KaE L 158 N  Lift-off force
KaE M 482 N  Lift-off force
KaE H 984 N  Lift-off force
ca L 77,2 N/µm  Axial rigidity
ca M 115 N/µm  Axial rigidity
ca H 150 N/µm  Axial rigidity

Nodes bearings have FAG HSS71909-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71909-E-T-P4S bearing cross reference

NSK 7909C bearing
45mm x 68mm x 12mm
NSK 7909CDB bearing
45mm x 68mm x 12mm
NSK 7909CDF bearing
45mm x 68mm x 12mm
NSK 7909A5DT bearing
45mm x 68mm x 12mm
NSK 7909CDT bearing
45mm x 68mm x 12mm
FAG B7009-C-T-P4S bearing
45mm x 75mm x 16mm
FAG B71909-C-T-P4S bearing
45mm x 68mm x 12mm
FAG B7209-C-T-P4S bearing
45mm x 85mm x 19mm
FAG B7009-E-T-P4S bearing
45mm x 75mm x 16mm
FAG B71909-E-T-P4S bearing
45mm x 68mm x 12mm
FAG B7209-E-T-P4S bearing
45mm x 85mm x 19mm

FAG spindle bearings

Related Information

Product search