FAG HSS71910-C-T-P4S Bearing

FAG HSS71910-C-T-P4S spindle bearings | 50x72x12mm

Also known as : HSS71910-C-T-P4S

• Inside Diameter: 50 mm
• Outside Diameter: 72 mm
• Width: 12 mm
• Basic dynamic load rating: 9.9 kN
• Basic static load rating: 6.5 kN

Inquire Now

FAG HSS71910-C-T-P4S Bearing

Number	HSS71910-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d	50 mm
D	72 mm
B	12 mm
a	14,2 mm
Da	67,5 mm	Tolerance: H12
da	55 mm	Tolerance: h12
r1 min	0,6 mm
ra max	0,6 mm
ra1 max	0,15 mm
rmin	0,6 mm
α	15 °	Contact angle
m	0,15 kg	≈ Mass
Cr	9900 N	Basic dynamic load rating, radial
C0r	6500 N	Basic static load rating, radial
Cur	670 N	Fatigue limit load, radial
nG Fett	26000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	35 N	Preload force
FV M	105 N	Preload force
FV H	209 N	Preload force
KaE L	104 N	Lift-off force
KaE M	328 N	Lift-off force
KaE H	682 N	Lift-off force
ca L	32,6 N/µm	Axial rigidity
ca M	51,2 N/µm	Axial rigidity
ca H	70 N/µm	Axial rigidity

Nodes bearings have FAG HSS71910-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.