INA CSXG200 bearings
Also known as : CSXG200, KG200XP0
- Inside Diameter: 508 mm
- Outside Diameter: 558.8 mm
- Width: 25.4 mm
- Basic dynamic load rating: 88 kN
- Basic static load rating: 242 kN
INA CSXG200 Bearing
INA CSXG200 Bearing details
| d | 508 mm | |
|---|---|---|
| d | 20 inch | |
| D | 558,8 mm | |
| B | 25,4 mm | |
| D1 | 540 mm | |
| d1 | 526,9 mm | |
| rmin | 2 mm | min. 2 is the smallest chamfer distance and the largest permissible rounding radius on the shaft and in the housing. |
| m | 7,16 kg | Mass |
| Cr | 88000 N | Basic dynamic load rating, radial |
| C0r | 242000 N | Basic static load rating, radial |
| nG Öl | 450 1/min |
Limiting speed With grease lubrication, the permissible value is taken as 70% of the value given in the table. Values are valid for a combination of axial and radial loads in a ratio Fa/Fr >= 0,8. |
| Available by agreement only |
As INA bearing distributor, Nodes bearings have INA CSXG200 thin section ball bearings in stock. Four point contact bearing, type X, for operating temperatures from -54°C to +120°C.
CSXG200 bearing are high precision products with very little running noise and very high load carrying capacity. CSXG200 bearing (type X) can support axial loads in both directions as well as radial loads. As a result, they act in the same way as double row angular contact ball bearings.
INA CSXG200 bearing cross reference
KAYDON KG200AR0 bearing
20.000" x 22.000" x 1"
KAYDON KG200CP0 bearing
20.000" x 22.000" x 1"
KAYDON KG200XP0 bearing
20.000" x 22.000" x 1"