INA YRTC200-XL Bearing

INA YRTC200-XL bearing | 200x300x45 mm

Also known as : YRTC200-XL

  • Inside Diameter: 200 mm
  • Outside Diameter: 300 mm
  • Width: 45 mm
  • Basic dynamic load rating: 123 kN
  • Basic static load rating: 275 kN

Inquire Now

INA YRTC200-XL Bearing

INA YRTC200-XL Bearing details

Number YRTC200-XL  
Type Axial/radial bearings
Double direction, for screw mounting
 
d 200mm Tolerance: 0/-0,015
D 300mm Tolerance: 0/-0,018
H 45mm  
  46 Number of fixing holes in inner ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  45 Number of fixing holes in outer ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes.
  2 Number of retaining screws
  3 Number of extraction threads
a 6,2mm Fixing holes in inner ring
C 15mm  
D1 max 274,4mm Diameter of inner ring for design of adjacent construction
d1 7mm Fixing holes in inner ring
d2 11mm Fixing holes in inner ring
d3 7mm Fixing holes in outer ring
G M8 Extraction thread
H1 30mm  
H2 15mm  
J 215mm Fixing holes in inner ring
J1 285mm Fixing holes in outer ring
t 48 x 7,5° Pitch t
Including retaining screws and extraction threads

Quantity X t
m 9,2kg ≈ Mass
MA 14Nm Screw tightening torque

Tightening torque for screws to DIN EN ISO 4762, grade 10.9.
Ca 147000N Basic dynamic load rating, axial
C0a 850000N Basic static load rating, axial
Cr 123000N Basic dynamic load rating, radial
C0r 275000N Basic static load rating, radial
Cur 39500N Fatigue limit load, radial
Cua 78000N Fatigue limit load, axial
nG 4501/min Limiting speed
For high operating durations or continuous operation, please contact us.
MR 6Nm Bearing frictional torque

Measurement speed n const = 5 1/min,
bearing temperature +50°C,
after grease distribution cycle;
frictional torque may increase by 2,5 times up to the limiting speed.
caL 4900N/µm Axial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
crL 4100N/µm Radial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
ckL 40000Nm/mrad Tilting rigidity of the bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections.
caL 15500N/µm Axial rigidity of rolling element set
crL 6200N/µm Radial rigidity of rolling element set
ckL 128000Nm/mrad Tilting rigidity of rolling element set

As INA bearing distributor, Nodes bearings have INA YRTC200-XL rotary table bearings in stock. YRTC200-XL, Double direction, for screw mounting.

related articles