INA rod ends bearings

INA spherical plain bearings

INA rod ends, maintenance-free
Maintenance-free rod ends comprise a housing with integral shank and a maintenance-free spherical plain bearing. The integral shank has an internal or external thread. The spherical plain bearing is firmly seated and located in the housing. The housings and shanks are protected against corrosion by a zinc coating.

INA corrosion-resistant rod ends, maintenance-free
Corrosion-resistant rod ends made from high-grade steel correspond in their construction to the maintenance-free rod ends but are of a corrosion-resistant design.

INA rod ends and hydraulic rod ends, requiring maintenance
Rod ends requiring maintenance comprise a housing with integral shank and a spherical plain bearing requiring maintenance. In other respects, the construction corresponds to that of maintenance-free rod ends.

Displaying 128 INA rod ends bearings.

INA

INA GAR8-UK Rod ends | d:8,d2:24,l2:54mm

Nodes bearings have INA GAR8-UK Rod end bearings in stock, GAR8-UK bearings dimensions: d:8,d2:24,l4:54mm, Cr: 5850N, C0r: 12900N, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 8 mm
d2: 24 mm
Height: 54 mm
Basic dynamic load rating: 5.85 kN
Basic static load rating: 5.85 kN

INA

INA GAR10-UK Rod ends | d:10,d2:29,l2:62.5mm

Nodes bearings have INA GAR10-UK Rod end bearings in stock, GAR10-UK bearings dimensions: d:10,d2:29,l4:62.5mm, Cr: 8640N, C0r: 20600N, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 10 mm
d2: 29 mm
Height: 62.5 mm
Basic dynamic load rating: 8.64 kN
Basic static load rating: 8.64 kN

INA

INA GAR15-UK Rod ends | d:15,d2:40,l2:83mm

Nodes bearings have INA GAR15-UK Rod end bearings in stock, GAR15-UK bearings dimensions: d:15,d2:40,l4:83mm, Cr: 17800N, C0r: 41600N, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 15 mm
d2: 40 mm
Height: 83 mm
Basic dynamic load rating: 17.8 kN
Basic static load rating: 17.8 kN

INA

INA GAR20-UK Rod ends | d:20,d2:53,l2:104.5mm

Nodes bearings have INA GAR20-UK Rod end bearings in stock, GAR20-UK bearings dimensions: d:20,d2:53,l4:104.5mm, Cr: 31300N, C0r: 75600N, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 20 mm
d2: 53 mm
Height: 104.5 mm
Basic dynamic load rating: 31.3 kN
Basic static load rating: 31.3 kN

INA

INA GAR25-UK Rod ends | d:25,d2:64,l2:126mm

Nodes bearings have INA GAR25-UK Rod end bearings in stock, GAR25-UK bearings dimensions: d:25,d2:64,l4:126mm, Cr: 51100N, C0r: 105000N, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 25 mm
d2: 64 mm
Height: 126 mm
Basic dynamic load rating: 51.1 kN
Basic static load rating: 51.1 kN

INA

INA GAR30-UK Rod ends | d:30,d2:73,l2:146.5mm

Nodes bearings have INA GAR30-UK Rod end bearings in stock, GAR30-UK bearings dimensions: d:30,d2:73,l4:146.5mm, Cr: 65900N, C0r: 139000N, with external thread, maintenance-free, to DIN ISO 12 240-4, right hand thread.

Brand: INA
d: 30 mm
d2: 73 mm
Height: 146.5 mm
Basic dynamic load rating: 65.9 kN
Basic static load rating: 65.9 kN

INA

INA GAL40-DO-2RS Rod ends | d:40,d2:92,l2:196mm

Nodes bearings have INA GAL40-DO-2RS Rod end bearings in stock, GAL40-DO-2RS bearings dimensions: d:40,d2:92,l4:196mm, Cr: 99100N, C0r: 194000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand threa

Brand: INA
d: 40 mm
d2: 92 mm
Height: 196 mm
Basic dynamic load rating: 99.1 kN
Basic static load rating: 99.1 kN

INA

INA GAL50-DO-2RS Rod ends | d:50,d2:112,l2:241mm

Nodes bearings have INA GAL50-DO-2RS Rod end bearings in stock, GAL50-DO-2RS bearings dimensions: d:50,d2:112,l4:241mm, Cr: 157000N, C0r: 314000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand thr

Brand: INA
d: 50 mm
d2: 112 mm
Height: 241 mm
Basic dynamic load rating: 157 kN
Basic static load rating: 157 kN

INA

INA GAL60-DO-2RS Rod ends | d:60,d2:135,l2:277.5mm

Nodes bearings have INA GAL60-DO-2RS Rod end bearings in stock, GAL60-DO-2RS bearings dimensions: d:60,d2:135,l4:277.5mm, Cr: 245000N, C0r: 485000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand t

Brand: INA
d: 60 mm
d2: 135 mm
Height: 277.5 mm
Basic dynamic load rating: 245 kN
Basic static load rating: 245 kN

INA

INA GAL70-DO-2RS Rod ends | d:70,d2:160,l2:315mm

Nodes bearings have INA GAL70-DO-2RS Rod end bearings in stock, GAL70-DO-2RS bearings dimensions: d:70,d2:160,l4:315mm, Cr: 313000N, C0r: 564000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand thr

Brand: INA
d: 70 mm
d2: 160 mm
Height: 315 mm
Basic dynamic load rating: 313 kN
Basic static load rating: 313 kN

INA

INA GAL80-DO-2RS Rod ends | d:80,d2:180,l2:360mm

Nodes bearings have INA GAL80-DO-2RS Rod end bearings in stock, GAL80-DO-2RS bearings dimensions: d:80,d2:180,l4:360mm, Cr: 402000N, C0r: 690000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, left hand thr

Brand: INA
d: 80 mm
d2: 180 mm
Height: 360 mm
Basic dynamic load rating: 402 kN
Basic static load rating: 402 kN

INA

INA GAR35-DO-2RS Rod ends | d:35,d2:82,l2:181mm

Nodes bearings have INA GAR35-DO-2RS Rod end bearings in stock, GAR35-DO-2RS bearings dimensions: d:35,d2:82,l4:181mm, Cr: 79900N, C0r: 159000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand thre

Brand: INA
d: 35 mm
d2: 82 mm
Height: 181 mm
Basic dynamic load rating: 79.9 kN
Basic static load rating: 79.9 kN

INA

INA GAR45-DO-2RS Rod ends | d:45,d2:102,l2:214mm

Nodes bearings have INA GAR45-DO-2RS Rod end bearings in stock, GAR45-DO-2RS bearings dimensions: d:45,d2:102,l4:214mm, Cr: 128000N, C0r: 259000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand th

Brand: INA
d: 45 mm
d2: 102 mm
Height: 214 mm
Basic dynamic load rating: 128 kN
Basic static load rating: 128 kN

INA

INA GAR50-DO-2RS Rod ends | d:50,d2:112,l2:241mm

Nodes bearings have INA GAR50-DO-2RS Rod end bearings in stock, GAR50-DO-2RS bearings dimensions: d:50,d2:112,l4:241mm, Cr: 157000N, C0r: 314000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand th

Brand: INA
d: 50 mm
d2: 112 mm
Height: 241 mm
Basic dynamic load rating: 157 kN
Basic static load rating: 157 kN

INA

INA GAR60-DO-2RS Rod ends | d:60,d2:135,l2:277.5mm

Nodes bearings have INA GAR60-DO-2RS Rod end bearings in stock, GAR60-DO-2RS bearings dimensions: d:60,d2:135,l4:277.5mm, Cr: 245000N, C0r: 485000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand

Brand: INA
d: 60 mm
d2: 135 mm
Height: 277.5 mm
Basic dynamic load rating: 245 kN
Basic static load rating: 245 kN

INA

INA GAR80-DO-2RS Rod ends | d:80,d2:180,l2:360mm

Nodes bearings have INA GAR80-DO-2RS Rod end bearings in stock, GAR80-DO-2RS bearings dimensions: d:80,d2:180,l4:360mm, Cr: 402000N, C0r: 690000N, with external thread, requiring maintenance, to DIN ISO 12 240-4, lip seals on both sides, right hand th

Brand: INA
d: 80 mm
d2: 180 mm
Height: 360 mm
Basic dynamic load rating: 402 kN
Basic static load rating: 402 kN

INA

INA GAL35-UK-2RS Rod ends | d:35,d2:82,l2:181mm

Nodes bearings have INA GAL35-UK-2RS Rod end bearings in stock, GAL35-UK-2RS bearings dimensions: d:35,d2:82,l4:181mm, Cr: 210000N, C0r: 159000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread.

Brand: INA
d: 35 mm
d2: 82 mm
Height: 181 mm
Basic dynamic load rating: 210 kN
Basic static load rating: 210 kN

INA

INA GAL45-UK-2RS Rod ends | d:45,d2:102,l2:214mm

Nodes bearings have INA GAL45-UK-2RS Rod end bearings in stock, GAL45-UK-2RS bearings dimensions: d:45,d2:102,l4:214mm, Cr: 360000N, C0r: 259000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread.

Brand: INA
d: 45 mm
d2: 102 mm
Height: 214 mm
Basic dynamic load rating: 360 kN
Basic static load rating: 360 kN

INA

INA GAL50-UK-2RS Rod ends | d:50,d2:112,l2:241mm

Nodes bearings have INA GAL50-UK-2RS Rod end bearings in stock, GAL50-UK-2RS bearings dimensions: d:50,d2:112,l4:241mm, Cr: 442000N, C0r: 313000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread.

Brand: INA
d: 50 mm
d2: 112 mm
Height: 241 mm
Basic dynamic load rating: 442 kN
Basic static load rating: 442 kN

INA

INA GAL60-UK-2RS Rod ends | d:60,d2:135,l2:277.5mm

Nodes bearings have INA GAL60-UK-2RS Rod end bearings in stock, GAL60-UK-2RS bearings dimensions: d:60,d2:135,l4:277.5mm, Cr: 690000N, C0r: 485000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread

Brand: INA
d: 60 mm
d2: 135 mm
Height: 277.5 mm
Basic dynamic load rating: 690 kN
Basic static load rating: 690 kN

INA

INA GAL70-UK-2RS Rod ends | d:70,d2:160,l2:315mm

Nodes bearings have INA GAL70-UK-2RS Rod end bearings in stock, GAL70-UK-2RS bearings dimensions: d:70,d2:160,l4:315mm, Cr: 885000N, C0r: 564000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread.

Brand: INA
d: 70 mm
d2: 160 mm
Height: 315 mm
Basic dynamic load rating: 885 kN
Basic static load rating: 885 kN

INA

INA GAL80-UK-2RS Rod ends | d:80,d2:180,l2:360mm

Nodes bearings have INA GAL80-UK-2RS Rod end bearings in stock, GAL80-UK-2RS bearings dimensions: d:80,d2:180,l4:360mm, Cr: 1125000N, C0r: 689000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, left hand thread.

Brand: INA
d: 80 mm
d2: 180 mm
Height: 360 mm
Basic dynamic load rating: 1125 kN
Basic static load rating: 1125 kN

INA

INA GAR35-UK-2RS Rod ends | d:35,d2:82,l2:181mm

Nodes bearings have INA GAR35-UK-2RS Rod end bearings in stock, GAR35-UK-2RS bearings dimensions: d:35,d2:82,l4:181mm, Cr: 210000N, C0r: 159000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread.

Brand: INA
d: 35 mm
d2: 82 mm
Height: 181 mm
Basic dynamic load rating: 210 kN
Basic static load rating: 210 kN

INA

INA GAR40-UK-2RS Rod ends | d:40,d2:92,l2:196mm

Nodes bearings have INA GAR40-UK-2RS Rod end bearings in stock, GAR40-UK-2RS bearings dimensions: d:40,d2:92,l4:196mm, Cr: 277000N, C0r: 194000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread.

Brand: INA
d: 40 mm
d2: 92 mm
Height: 196 mm
Basic dynamic load rating: 277 kN
Basic static load rating: 277 kN

INA

INA GAR45-UK-2RS Rod ends | d:45,d2:102,l2:214mm

Nodes bearings have INA GAR45-UK-2RS Rod end bearings in stock, GAR45-UK-2RS bearings dimensions: d:45,d2:102,l4:214mm, Cr: 360000N, C0r: 259000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread.

Brand: INA
d: 45 mm
d2: 102 mm
Height: 214 mm
Basic dynamic load rating: 360 kN
Basic static load rating: 360 kN

INA

INA GAR50-UK-2RS Rod ends | d:50,d2:112,l2:241mm

Nodes bearings have INA GAR50-UK-2RS Rod end bearings in stock, GAR50-UK-2RS bearings dimensions: d:50,d2:112,l4:241mm, Cr: 442000N, C0r: 313000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread.

Brand: INA
d: 50 mm
d2: 112 mm
Height: 241 mm
Basic dynamic load rating: 442 kN
Basic static load rating: 442 kN

INA

INA GAR60-UK-2RS Rod ends | d:60,d2:135,l2:277.5mm

Nodes bearings have INA GAR60-UK-2RS Rod end bearings in stock, GAR60-UK-2RS bearings dimensions: d:60,d2:135,l4:277.5mm, Cr: 690000N, C0r: 485000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand threa

Brand: INA
d: 60 mm
d2: 135 mm
Height: 277.5 mm
Basic dynamic load rating: 690 kN
Basic static load rating: 690 kN

INA

INA GAR70-UK-2RS Rod ends | d:70,d2:160,l2:315mm

Nodes bearings have INA GAR70-UK-2RS Rod end bearings in stock, GAR70-UK-2RS bearings dimensions: d:70,d2:160,l4:315mm, Cr: 885000N, C0r: 564000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread.

Brand: INA
d: 70 mm
d2: 160 mm
Height: 315 mm
Basic dynamic load rating: 885 kN
Basic static load rating: 885 kN

INA

INA GAR80-UK-2RS Rod ends | d:80,d2:180,l2:360mm

Nodes bearings have INA GAR80-UK-2RS Rod end bearings in stock, GAR80-UK-2RS bearings dimensions: d:80,d2:180,l4:360mm, Cr: 1125000N, C0r: 689000N, with external thread, maintenance-free, to DIN ISO 12 240-4, lip seals on both sides, right hand thread

Brand: INA
d: 80 mm
d2: 180 mm
Height: 360 mm
Basic dynamic load rating: 1125 kN
Basic static load rating: 1125 kN

INA

INA GIL6-DO Rod ends | d:6,d2:21,l4:40.5mm

Nodes bearings have INA GIL6-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL6-DO bearings dimensions: d:6,d2:21,l4:40.5mm, Cr: 3400N, C0r: 10300N.

Brand: INA
d: 6 mm
d2: 21 mm
Height: 40.5 mm
Basic dynamic load rating: 3.4 kN
Basic static load rating: 3.4 kN

INA

INA GIL12-DO Rod ends | d:12,d2:34,l4:67mm

Nodes bearings have INA GIL12-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL12-DO bearings dimensions: d:12,d2:34,l4:67mm, Cr: 10800N, C0r: 30400N.

Brand: INA
d: 12 mm
d2: 34 mm
Height: 67 mm
Basic dynamic load rating: 10.8 kN
Basic static load rating: 10.8 kN

INA

INA GIL15-DO Rod ends | d:15,d2:40,l4:81mm

Nodes bearings have INA GIL15-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL15-DO bearings dimensions: d:15,d2:40,l4:81mm, Cr: 16900N, C0r: 44800N.

Brand: INA
d: 15 mm
d2: 40 mm
Height: 81 mm
Basic dynamic load rating: 16.9 kN
Basic static load rating: 16.9 kN

INA

INA GIL20-DO Rod ends | d:20,d2:53,l4:103.5mm

Nodes bearings have INA GIL20-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL20-DO bearings dimensions: d:20,d2:53,l4:103.5mm, Cr: 29600N, C0r: 75600N.

Brand: INA
d: 20 mm
d2: 53 mm
Height: 103.5 mm
Basic dynamic load rating: 29.6 kN
Basic static load rating: 29.6 kN

INA

INA GIL30-DO Rod ends | d:30,d2:73,l4:146.5mm

Nodes bearings have INA GIL30-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, left hand thread, GIL30-DO bearings dimensions: d:30,d2:73,l4:146.5mm, Cr: 62300N, C0r: 119000N.

Brand: INA
d: 30 mm
d2: 73 mm
Height: 146.5 mm
Basic dynamic load rating: 62.3 kN
Basic static load rating: 62.3 kN

INA

INA GIR6-DO Rod ends | d:6,d2:21,l4:40.5mm

Nodes bearings have INA GIR6-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread, GIR6-DO bearings dimensions: d:6,d2:21,l4:40.5mm, Cr: 3400N, C0r: 10300N.

Brand: INA
d: 6 mm
d2: 21 mm
Height: 40.5 mm
Basic dynamic load rating: 3.4 kN
Basic static load rating: 3.4 kN

INA

INA GIR8-DO Rod ends | d:8,d2:24,l4:48mm

Nodes bearings have INA GIR8-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread, GIR8-DO bearings dimensions: d:8,d2:24,l4:48mm, Cr: 5590N, C0r: 16000N.

Brand: INA
d: 8 mm
d2: 24 mm
Height: 48 mm
Basic dynamic load rating: 5.59 kN
Basic static load rating: 5.59 kN

INA

INA GIR10-DO Rod ends | d:10,d2:29,l4:57.5mm

Nodes bearings have INA GIR10-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread, GIR10-DO bearings dimensions: d:10,d2:29,l4:57.5mm, Cr: 8160N, C0r: 22000N.

Brand: INA
d: 10 mm
d2: 29 mm
Height: 57.5 mm
Basic dynamic load rating: 8.16 kN
Basic static load rating: 8.16 kN

INA

INA GIR12-DO Rod ends | d:12,d2:34,l4:67mm

Nodes bearings have INA GIR12-DO none in stock, with internal thread, requiring maintenance, to DIN ISO 12 240-4, right hand thread, GIR12-DO bearings dimensions: d:12,d2:34,l4:67mm, Cr: 10800N, C0r: 30400N.

Brand: INA
d: 12 mm
d2: 34 mm
Height: 67 mm
Basic dynamic load rating: 10.8 kN
Basic static load rating: 10.8 kN