INA XV110 bearing | 110x180 mm
Also known as : XV110
- Inside Diameter: 110 mm
- Outside Diameter: 180 mm
- Basic dynamic load rating: 57 kN
- Basic static load rating: 180 kN
INA XV110 Bearing
INA XV110 Bearing details
| Part Number | XV110 | |
|---|---|---|
| Type |
Crossed roller bearings without gear teeth, lamellar seals on both sides |
|
| di | 110mm | Tolerance: J6 |
| Da | 180mm | Tolerance: h6 |
| 20° | Chamfer angle | |
| 2mm | Chamfer width/height | |
| Di | 127,5mm | |
| da | 126,5mm | |
| dB | 9mm | |
| dS | 15mm | |
| Ha | 22mm | |
| hi | 23mm | |
| La | 160mm | |
| nϑr | 16 | Number of holes per ring |
| tS | 8,5mm | |
| m | 2,48kg | Mass |
| 0,010mm | Running accuracy, axial | |
| 0,01mm | Running accuracy, radial | |
| Fr per | 28200N | Maximum permissible radial load against friction lock |
| Ca | 57000N | Basic dynamic load rating, axial |
| C0a | 180000N | Basic static load rating, axial |
| Cr | 40500N | Basic dynamic load rating, radial |
| C0r | 88000N | Basic static load rating, radial |
| 3011/min | Limiting speed with preload | |
| 6021/min | Limiting speed with clearance |
As INA bearing distributor, Nodes bearings have INA XV110 crossed roller bearings in stock. XV110, Crossed roller bearings without gear teeth, lamellar seals on both sides.
