INA XV30 bearing | 30x75 mm
Also known as : XV30
- Inside Diameter: 30 mm
- Outside Diameter: 75 mm
- Basic dynamic load rating: 11.5 kN
- Basic static load rating: 26 kN
INA XV30 Bearing
INA XV30 Bearing details
| Part Number | XV30 | |
|---|---|---|
| Type |
Crossed roller bearings without gear teeth, lamellar seals on both sides |
|
| di | 30mm | Tolerance: J6 |
| Da | 75mm | Tolerance: h6 |
| 20° | Chamfer angle | |
| 2mm | Chamfer width/height | |
| Di | 42,5mm | |
| da | 41,5mm | |
| dB | 4,6mm | |
| dS | 8mm | |
| Ha | 14mm | |
| hi | 15mm | |
| La | 60mm | |
| nϑr | 12 | Number of holes per ring |
| tS | 4,6mm | |
| m | 0,37kg | Mass |
| 0,010mm | Running accuracy, axial | |
| 0,01mm | Running accuracy, radial | |
| Fr per | 5000N | Maximum permissible radial load against friction lock |
| Ca | 11500N | Basic dynamic load rating, axial |
| C0a | 26000N | Basic static load rating, axial |
| Cr | 8200N | Basic dynamic load rating, radial |
| C0r | 12700N | Basic static load rating, radial |
| 9101/min | Limiting speed with preload | |
| 18191/min | Limiting speed with clearance |
As INA bearing distributor, Nodes bearings have INA XV30 crossed roller bearings in stock. XV30, Crossed roller bearings without gear teeth, lamellar seals on both sides.
