INA XV90 bearing | 90x145 mm
Also known as : XV90
- Inside Diameter: 90 mm
- Outside Diameter: 145 mm
- Basic dynamic load rating: 35 kN
- Basic static load rating: 111 kN
INA XV90 Bearing
INA XV90 Bearing details
| Part Number | XV90 | |
|---|---|---|
| Type |
Crossed roller bearings without gear teeth, lamellar seals on both sides |
|
| di | 90mm | Tolerance: J6 |
| Da | 145mm | Tolerance: h6 |
| 20° | Chamfer angle | |
| 2mm | Chamfer width/height | |
| Di | 105,5mm | |
| da | 104,5mm | |
| dB | 6,6mm | |
| dS | 11mm | |
| Ha | 18mm | |
| hi | 19mm | |
| La | 130mm | |
| nϑr | 16 | Number of holes per ring |
| tS | 6,4mm | |
| m | 1,29kg | Mass |
| 0,010mm | Running accuracy, axial | |
| 0,01mm | Running accuracy, radial | |
| Fr per | 15300N | Maximum permissible radial load against friction lock |
| Ca | 35000N | Basic dynamic load rating, axial |
| C0a | 111000N | Basic static load rating, axial |
| Cr | 24900N | Basic dynamic load rating, radial |
| C0r | 54000N | Basic static load rating, radial |
| 3641/min | Limiting speed with preload | |
| 7281/min | Limiting speed with clearance |
As INA bearing distributor, Nodes bearings have INA XV90 crossed roller bearings in stock. XV90, Crossed roller bearings without gear teeth, lamellar seals on both sides.
