INA ZKLF3590-2RS-XL Bearing

INA ZKLF3590-2RS-XL bearing | 35x90x34 mm

Also known as : ZKLF3590-2RS-XL

• Inside Diameter: 35 mm
• Outside Diameter: 90 mm
• Width: 34 mm
• Basic dynamic load rating: 45 kN
• Basic static load rating: 89 kN

Inquire Now

INA ZKLF3590-2RS-XL Bearing

Number	ZKLF3590-2RS-XL
Type	Axial angular contact ball bearings double direction, for screw mounting, lip seals on both sides
d	35mm	Tolerance: 0/-0,005
D	90mm	Tolerance: 0/-0,01
B	34mm	Tolerance: 0/-0,25
	M6	Threaded connector for lubrication
	60°	Contact angle
	M8	Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data.
b	3mm
Da max	62mm
d1	52mm
d2	8,8mm
da min	45mm
I	25mm
J	75mm
naxta	4 x 90°	Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data. Number of holes in adjacent construction corresponds to n a.
n x t	8 x 45°	Pitch
r1 min	0,6mm
rmin	0,3mm
t1	0,2mm
m	1,13kg	≈ Mass
Ca	45000N	Basic dynamic load rating, axial
C0a	89000N	Basic static load rating, axial
Cua	5400N	Fatigue limit load, axial
nG Fett	44001/min	Limiting speed for grease lubrication
nϑ	20001/min	Thermally safe operating speed
MRL	0,6Nm	Bearing frictional torque
caL	900N/µm	Axial rigidity
ckL	400Nm/mrad	Tilting rigidity
Mm	1,51kg * cm^2	Mass moment of inertia for rotating inner ring
	2,5µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZM35	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
	AM35/58	Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	40Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	10770N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

As INA bearing distributor, Nodes bearings have INA ZKLF3590-2RS-XL ball screw support bearings in stock. ZKLF3590-2RS-XL, Axial angular contact ball bearings.