TIMKEN 09081-09195 Bearing

TIMKEN 09081-09195 tapered roller bearings

Also known as : 09081-09195

• Inside Diameter: 20.625 mm
• Outside Diameter: 49.225 mm
• Width: 19.845 mm
• Basic dynamic load rating: 42.8 kN
• Basic static load rating: 40.5 kN

Inquire Now

TIMKEN 09081-09195 Bearing

Series	09000
model	09081-09195
Cone Part Number	09081
Cup Part Number	09195
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.4 lb
Dimensions
d - Bore	20.625 mm 0.8120 in
D - Cup Outer Diameter	49.225 mm 1.9380 in
B - Cone Width	21.539 mm 0.8480 in
C - Cup Width	14.288 mm 0.5625 in
T - Bearing Width	19.845 mm 0.7813 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.27 mm 0.050 in
da - Cone Frontface Backing Diameter	25.40 mm 1.00 in
db - Cone Backface Backing Diameter	27.43 mm 1.08 in
Da - Cup Frontface Backing Diameter	44.50 mm 1.79 in
Db - Cup Backface Backing Diameter	41.91 mm 1.65 in
Ab - Cage-Cone Frontface Clearance	1.5 mm 0.06 in
Aa - Cage-Cone Backface Clearance	1.8 mm 0.07 in
a - Effective Center Location	-9.10 mm -0.36 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	11100 N 2500 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	42800 N 9630 lbf
C0 - Static Radial Rating	40500 N 9100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	5050 N 1140 lbf
Factors
K - Factor	2.2
e - ISO Factor	0.27
Y - ISO Factor	2.26
G1 - Heat Generation Factor (Roller-Raceway)	8
G2 - Heat Generation Factor (Rib-Roller End)	4.05
Cg - Geometry Factor	0.0452

TIMKEN 09081-09195 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.