TIMKEN 17580-17520 Bearing

TIMKEN 17580-17520 tapered roller bearings

Also known as : 17580-17520

• Inside Diameter: 15.875 mm
• Outside Diameter: 42.863 mm
• Width: 16.67 mm
• Basic dynamic load rating: 31.4 kN
• Basic static load rating: 29.2 kN

Inquire Now

TIMKEN 17580-17520 Bearing

Series	17500
model	17580-17520
Cone Part Number	17580
Cup Part Number	17520
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.30 lb
Dimensions
d - Bore	15.875 mm 0.6250 in
D - Cup Outer Diameter	42.863 mm 1.6875 in
B - Cone Width	16.670 mm 0.6563 in
C - Cup Width	13.495 mm 0.5313 in
T - Bearing Width	16.670 mm 0.6563 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.52 mm 0.06 in
da - Cone Frontface Backing Diameter	21.08 mm 0.83 in
db - Cone Backface Backing Diameter	23.11 mm 0.91 in
Da - Cup Frontface Backing Diameter	39.62 mm 1.56 in
Db - Cup Backface Backing Diameter	36.58 mm 1.44 in
Ab - Cage-Cone Frontface Clearance	2.8 mm 0.11 in
Aa - Cage-Cone Backface Clearance	-0.3 mm -0.01 in
a - Effective Center Location	-5.80 mm -0.23 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	8150 N 1830 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	31400 N 7070 lbf
C0 - Static Radial Rating	29200 N 6560 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	4620 N 1040 lbf
Factors
K - Factor	1.76
e - ISO Factor	0.33
Y - ISO Factor	1.81
G1 - Heat Generation Factor (Roller-Raceway)	5.3
G2 - Heat Generation Factor (Rib-Roller End)	4.53
Cg - Geometry Factor	0.0423

TIMKEN 17580-17520 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.