TIMKEN 1994X-1922 Bearing

TIMKEN 1994X-1922 tapered roller bearings

Also known as : 1994X-1922

  • Inside Diameter: 25.4 mm
  • Outside Diameter: 57.15 mm
  • Width: 19.845 mm
  • Basic dynamic load rating: 48.4 kN
  • Basic static load rating: 50.2 kN

Inquire Now


TIMKEN 1994X-1922 Bearing

TIMKEN 1994X-1922 Bearing details

Series 1900
model 1994X-1922
Cone Part Number 1994X
Cup Part Number 1922
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.200 Kg
0.50 lb
Dimensions
d - Bore 25.400 mm
1.0000 in
D - Cup Outer Diameter 57.150 mm
2.2500 in
B - Cone Width 19.355 mm
0.7620 in
C - Cup Width 15.875 mm
0.6250 in
T - Bearing Width 19.845 mm
0.7813 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.560 mm
0.14 in
r - Cup Backface "To Clear" Radius 1.52 mm
0.06 in
da - Cone Frontface Backing Diameter 30.48 mm
1.20 in
db - Cone Backface Backing Diameter 37.08 mm
1.46 in
Da - Cup Frontface Backing Diameter 54.10 mm
2.13 in
Db - Cup Backface Backing Diameter 51.05 mm
2.01 in
Ab - Cage-Cone Frontface Clearance 2 mm
0.08 in
Aa - Cage-Cone Backface Clearance 0 mm
0 in
a - Effective Center Location -5.80 mm
-0.23 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 12500 N
2820 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 48400 N
10900 lbf
C0 - Static Radial Rating 50200 N
11300 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 7080 N
1590 lbf
Factors
K - Factor 1.77
e - ISO Factor 0.33
Y - ISO Factor 1.82
G1 - Heat Generation Factor (Roller-Raceway) 12.5
G2 - Heat Generation Factor (Rib-Roller End) 6.33
Cg - Geometry Factor 0.0565

TIMKEN 1994X-1922 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.

TIMKEN bearing cross reference

TIMKEN 1994X-1920 bearing
25.400mm x 56.896mm x 19.848mm
TIMKEN 1994X-1930 bearing
25.400mm x 56.896mm x 19.848mm
TIMKEN 1994X-1932 bearing
25.400mm x 58.738mm x 19.053mm
TIMKEN 1994X-1929 bearing
25.400mm x 60.325mm x 19.053mm
TIMKEN 1994X-1931 bearing
25.400mm x 60.325mm x 19.845mm