TIMKEN 315-313 Bearing

TIMKEN 315-313 tapered roller bearings

Also known as : 315-313

• Inside Diameter: 25.4 mm
• Outside Diameter: 71.999 mm
• Width: 19.002 mm
• Basic dynamic load rating: 74.9 kN
• Basic static load rating: 74.8 kN

Inquire Now

TIMKEN 315-313 Bearing

Series	315
model	315-313
Cone Part Number	315
Cup Part Number	313
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.400 Kg 1.00 lb
Dimensions
d - Bore	25.400 mm 1.0000 in
D - Cup Outer Diameter	71.999 mm 2.8346 in
B - Cone Width	22.174 mm 0.8730 in
C - Cup Width	18.999 mm 0.7480 in
T - Bearing Width	19.002 mm 0.7481 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.760 mm 0.03 in
r - Cup Backface "To Clear" Radius	2.03 mm 0.08 in
da - Cone Frontface Backing Diameter	33.02 mm 1.30 in
db - Cone Backface Backing Diameter	33.53 mm 1.32 in
Da - Cup Frontface Backing Diameter	68.10 mm 2.72 in
Db - Cup Backface Backing Diameter	65.02 mm 2.56 in
Ab - Cage-Cone Frontface Clearance	1 mm 0.04 in
Aa - Cage-Cone Backface Clearance	0.3 mm 0.01 in
a - Effective Center Location	-6.9 mm -0.27 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	19400 N 4370 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	74900 N 16800 lbf
C0 - Static Radial Rating	74800 N 16800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	8370 N 1880 lbf
Factors
K - Factor	2.32
e - ISO Factor	0.25
Y - ISO Factor	2.38
G1 - Heat Generation Factor (Roller-Raceway)	20.3
G2 - Heat Generation Factor (Rib-Roller End)	7.9
Cg - Geometry Factor	0.0602

TIMKEN 315-313 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.