TIMKEN 3162-3120 Bearing

TIMKEN 3162-3120 tapered roller bearings

Also known as : 3162-3120

• Inside Diameter: 23.813 mm
• Outside Diameter: 72.626 mm
• Width: 39.741 mm
• Basic dynamic load rating: 94.8 kN
• Basic static load rating: 102 kN

Inquire Now

TIMKEN 3162-3120 Bearing

Series	3100
model	3162-3120
Cone Part Number	3162
Cup Part Number	3120
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.800 Kg 1.70 lb
Dimensions
d - Bore	23.813 mm 0.9375 in
D - Cup Outer Diameter	72.626 mm 2.8593 in
B - Cone Width	39.573 mm 1.5580 in
C - Cup Width	23.813 mm 0.9375 in
T - Bearing Width	39.741 mm 1.5646 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.250 mm 0.010 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	34.04 mm 1.34 in
db - Cone Backface Backing Diameter	34.04 mm 1.34 in
Da - Cup Frontface Backing Diameter	67.10 mm 2.68 in
Db - Cup Backface Backing Diameter	60.96 mm 2.40 in
Ab - Cage-Cone Frontface Clearance	1.5 mm 0.06 in
Aa - Cage-Cone Backface Clearance	10.4 mm 0.41 in
a - Effective Center Location	-19.60 mm -0.77 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	24600 N 5520 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	94800 N 21300 lbf
C0 - Static Radial Rating	102000 N 22800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	14000 N 3140 lbf
Factors
K - Factor	1.76
e - ISO Factor	0.33
Y - ISO Factor	1.8
G1 - Heat Generation Factor (Roller-Raceway)	23.4
G2 - Heat Generation Factor (Rib-Roller End)	8.8
Cg - Geometry Factor	0.0697

TIMKEN 3162-3120 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.