TIMKEN 3190-3120 Bearing

TIMKEN 3190-3120 tapered roller bearings

Also known as : 3190-3120

  • Inside Diameter: 30 mm
  • Outside Diameter: 72.626 mm
  • Width: 30.165 mm
  • Basic dynamic load rating: 94.8 kN
  • Basic static load rating: 102 kN

Inquire Now


TIMKEN 3190-3120 Bearing

TIMKEN 3190-3120 Bearing details

Series 3100
model 3190-3120
Cone Part Number 3190
Cup Part Number 3120
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.600 Kg
1.30 lb
Dimensions
d - Bore 30 mm
1.1811 in
D - Cup Outer Diameter 72.626 mm
2.8593 in
B - Cone Width 29.997 mm
1.1810 in
C - Cup Width 23.813 mm
0.9375 in
T - Bearing Width 30.165 mm
1.1876 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.560 mm
0.14 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 38.10 mm
1.50 in
db - Cone Backface Backing Diameter 44.45 mm
1.75 in
Da - Cup Frontface Backing Diameter 67.10 mm
2.68 in
Db - Cup Backface Backing Diameter 60.96 mm
2.40 in
Ab - Cage-Cone Frontface Clearance 1.5 mm
0.06 in
Aa - Cage-Cone Backface Clearance 0.8 mm
0.03 in
a - Effective Center Location -10.2 mm
-0.4 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 24600 N
5520 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 94800 N
21300 lbf
C0 - Static Radial Rating 102000 N
22800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 14000 N
3140 lbf
Factors
K - Factor 1.76
e - ISO Factor 0.33
Y - ISO Factor 1.8
G1 - Heat Generation Factor (Roller-Raceway) 23.4
G2 - Heat Generation Factor (Rib-Roller End) 8.8
Cg - Geometry Factor 0.0697

TIMKEN 3190-3120 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.

TIMKEN bearing cross reference

TIMKEN 3190-3126 bearing
30mm x 72.034mm x 30.163mm
TIMKEN 3190-3130 bearing
30mm x 72.626mm x 30.165mm
TIMKEN 3190-3129 bearing
30mm x 76.2mm x 30.165mm