TIMKEN 320-312 Bearing

TIMKEN 320-312 tapered roller bearings

Also known as : 320-312

  • Inside Diameter: 22.225 mm
  • Outside Diameter: 72.626 mm
  • Width: 26.993 mm
  • Basic dynamic load rating: 74.9 kN
  • Basic static load rating: 74.8 kN

Inquire Now


TIMKEN 320-312 Bearing

TIMKEN 320-312 Bearing details

Series 315
model 320-312
Cone Part Number 320
Cup Part Number 312
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.500 Kg
1.20 lb
Dimensions
d - Bore 22.225 mm
0.8750 in
D - Cup Outer Diameter 72.626 mm
2.8593 in
B - Cone Width 22.174 mm
0.8730 in
C - Cup Width 23.813 mm
0.9375 in
T - Bearing Width 26.993 mm
1.0627 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 0.760 mm
0.03 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 29.97 mm
1.18 in
db - Cone Backface Backing Diameter 30.99 mm
1.22 in
Da - Cup Frontface Backing Diameter 67.10 mm
2.68 in
Db - Cup Backface Backing Diameter 62.99 mm
2.48 in
Ab - Cage-Cone Frontface Clearance 1 mm
0.04 in
Aa - Cage-Cone Backface Clearance 0.3 mm
0.01 in
a - Effective Center Location -6.9 mm
-0.27 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 19400 N
4370 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 74900 N
16800 lbf
C0 - Static Radial Rating 74800 N
16800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 8370 N
1880 lbf
Factors
K - Factor 2.32
e - ISO Factor 0.25
Y - ISO Factor 2.38
G1 - Heat Generation Factor (Roller-Raceway) 20.3
G2 - Heat Generation Factor (Rib-Roller End) 7.9
Cg - Geometry Factor 0.0602

TIMKEN 320-312 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.

TIMKEN bearing cross reference

TIMKEN 320-313 bearing
22.225mm x 71.999mm x 19.002mm