TIMKEN 356-354A Bearing

TIMKEN 356-354A tapered roller bearings

Also known as : 356-354A

• Inside Diameter: 30.163 mm
• Outside Diameter: 85.001 mm
• Width: 20.635 mm
• Basic dynamic load rating: 81.8 kN
• Basic static load rating: 88.8 kN

Inquire Now

TIMKEN 356-354A Bearing

Series	355
model	356-354A
Cone Part Number	356
Cup Part Number	354A
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.700 Kg 1.40 lb
Dimensions
d - Bore	30.163 mm 1.1875 in
D - Cup Outer Diameter	85.001 mm 3.3465 in
B - Cone Width	21.692 mm 0.8540 in
C - Cup Width	17.463 mm 0.6875 in
T - Bearing Width	20.635 mm 0.8124 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.760 mm 0.03 in
r - Cup Backface "To Clear" Radius	1.27 mm 0.050 in
da - Cone Frontface Backing Diameter	39.62 mm 1.56 in
db - Cone Backface Backing Diameter	39.88 mm 1.57 in
Da - Cup Frontface Backing Diameter	80.77 mm 3.18 in
Db - Cup Backface Backing Diameter	76.96 mm 3.03 in
Ab - Cage-Cone Frontface Clearance	2.3 mm 0.09 in
Aa - Cage-Cone Backface Clearance	0 mm 0 in
a - Effective Center Location	-4.80 mm -0.19 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	21200 N 4770 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	81800 N 18400 lbf
C0 - Static Radial Rating	88800 N 20000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	11100 N 2500 lbf
Factors
K - Factor	1.91
e - ISO Factor	0.31
Y - ISO Factor	1.96
G1 - Heat Generation Factor (Roller-Raceway)	30
G2 - Heat Generation Factor (Rib-Roller End)	12.2
Cg - Geometry Factor	0.0732

TIMKEN 356-354A bearings, TS (Tapered Single) Imperial, Tapered roller bearings.