TIMKEN 443-433 Bearing

TIMKEN 443-433 tapered roller bearings

Also known as : 443-433

• Inside Diameter: 31.75 mm
• Outside Diameter: 88.501 mm
• Width: 35.725 mm
• Basic dynamic load rating: 127 kN
• Basic static load rating: 144 kN

Inquire Now

TIMKEN 443-433 Bearing

Series	435
model	443-433
Cone Part Number	443
Cup Part Number	433
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	1.100 Kg 2.30 lb
Dimensions
d - Bore	31.750 mm 1.2500 in
D - Cup Outer Diameter	88.501 mm 3.4843 in
B - Cone Width	29.901 mm 1.1772 in
C - Cup Width	30.163 mm 1.1875 in
T - Bearing Width	35.725 mm 1.4065 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.760 mm 0.03 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	40.89 mm 1.61 in
db - Cone Backface Backing Diameter	41.91 mm 1.65 in
Da - Cup Frontface Backing Diameter	84.10 mm 3.34 in
Db - Cup Backface Backing Diameter	76.96 mm 3.03 in
Ab - Cage-Cone Frontface Clearance	1.3 mm 0.05 in
Aa - Cage-Cone Backface Clearance	1 mm 0.04 in
a - Effective Center Location	-9.10 mm -0.36 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	32900 N 7400 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	127000 N 28500 lbf
C0 - Static Radial Rating	144000 N 32400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	16000 N 3600 lbf
Factors
K - Factor	2.05
e - ISO Factor	0.28
Y - ISO Factor	2.11
G1 - Heat Generation Factor (Roller-Raceway)	42.5
G2 - Heat Generation Factor (Rib-Roller End)	11.3
Cg - Geometry Factor	0.0805

TIMKEN 443-433 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.