TIMKEN A6062-A6157 Bearing

TIMKEN A6062-A6157 tapered roller bearings

Also known as : A6062-A6157

• Inside Diameter: 15.875 mm
• Outside Diameter: 39.992 mm
• Width: 12.014 mm
• Basic dynamic load rating: 13.4 kN
• Basic static load rating: 12.3 kN

Inquire Now

TIMKEN A6062-A6157 Bearing

Series	A6000
model	A6062-A6157
Cone Part Number	A6062
Cup Part Number	A6157
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.20 lb
Dimensions
d - Bore	15.875 mm 0.6250 in
D - Cup Outer Diameter	39.992 mm 1.5745 in
B - Cone Width	11.153 mm 0.4391 in
C - Cup Width	9.525 mm 0.3750 in
T - Bearing Width	12.014 mm 0.4730 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.270 mm 0.050 in
r - Cup Backface "To Clear" Radius	1.27 mm 0.050 in
da - Cone Frontface Backing Diameter	20.57 mm 0.81 in
db - Cone Backface Backing Diameter	22.10 mm 0.87 in
Da - Cup Frontface Backing Diameter	37.59 mm 1.48 in
Db - Cup Backface Backing Diameter	34.04 mm 1.34 in
Ab - Cage-Cone Frontface Clearance	2.3 mm 0.09 in
Aa - Cage-Cone Backface Clearance	0.3 mm 0.01 in
a - Effective Center Location	-1.5 mm -0.06 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	3480 N 782 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	13400 N 3020 lbf
C0 - Static Radial Rating	12300 N 2770 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	3140 N 705 lbf
Factors
K - Factor	1.11
e - ISO Factor	0.53
Y - ISO Factor	1.14
G1 - Heat Generation Factor (Roller-Raceway)	2.9
G2 - Heat Generation Factor (Rib-Roller End)	5.64
Cg - Geometry Factor	0.0404

TIMKEN A6062-A6157 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.