TIMKEN LM72849-LM72810 Bearing

TIMKEN LM72849-LM72810 tapered roller bearings

Also known as : LM72849-LM72810

• Inside Diameter: 22.606 mm
• Outside Diameter: 47 mm
• Width: 15.499 mm
• Basic dynamic load rating: 35.1 kN
• Basic static load rating: 33 kN

Inquire Now

TIMKEN LM72849-LM72810 Bearing

Series	LM72800
model	LM72849-LM72810
Cone Part Number	LM72849
Cup Part Number	LM72810
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.100 Kg 0.30 lb
Dimensions
d - Bore	22.606 mm 0.8900 in
D - Cup Outer Diameter	47.000 mm 1.8504 in
B - Cone Width	15.499 mm 0.6102 in
C - Cup Width	11.999 mm 0.4724 in
T - Bearing Width	15.499 mm 0.6102 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.520 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.02 mm 0.04 in
da - Cone Frontface Backing Diameter	27.94 mm 1.10 in
db - Cone Backface Backing Diameter	29.97 mm 1.18 in
Da - Cup Frontface Backing Diameter	44.45 mm 1.75 in
Db - Cup Backface Backing Diameter	40.39 mm 1.59 in
Ab - Cage-Cone Frontface Clearance	1.8 mm 0.07 in
Aa - Cage-Cone Backface Clearance	0 mm 0 in
a - Effective Center Location	-3 mm -0.12 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	9110 N 2050 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	35100 N 7900 lbf
C0 - Static Radial Rating	33000 N 7420 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	7380 N 1660 lbf
Factors
K - Factor	1.24
e - ISO Factor	0.47
Y - ISO Factor	1.27
G1 - Heat Generation Factor (Roller-Raceway)	7.5
G2 - Heat Generation Factor (Rib-Roller End)	8.95
Cg - Geometry Factor	0.0538

TIMKEN LM72849-LM72810 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.