TIMKEN LM258648DGW - LM258610 Tapered Roller Bearings
Also known as : LM258648DGW - LM258610
- Inside Diameter: 317.5 mm
- Outside Diameter: 422.275 mm
- Width: 128.588 mm
- Basic dynamic load rating: 1720 kN
- Basic static load rating: 445 kN
TIMKEN LM258648DGW - LM258610 Bearing
TIMKEN LM258648DGW - LM258610 Bearing details
| Bearing Number | LM258648DGW - LM258610 |
|---|---|
| Brand | TIMKEN |
| Type | Tapered Roller Bearings - TDI (Tapered Double Inner) |
| Series | LM258600 |
| Cone Part Number | LM258648DGW |
| Cup Part Number | LM258610 |
| Design Units | Imperial |
| Bearing Weight |
107.4 lb 48.70 Kg |
| Cage Type | Stamped Steel |
| Aa - Cage-Cone Backface Clearance |
0 in 0 mm |
| d - Bore |
12.5000 in 317.500 mm |
| D - Cup Outer Diameter |
16.6250 in 422.275 mm |
| B - Double Cone Width |
5.0625 in 128.588 mm |
| C - Cup Width |
2.1250 in 53.975 mm |
| T - Bearing Width across Cups |
5.0625 in 128.588 mm |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
57500 lbf 256000 N |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
386000 lbf 1720000 N |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
100000 lbf 445000 N |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
31400 lbf 140000 N |
| K - Factor | 1.83 |
| e - ISO Factor | 0.67 |
| Y1 - ISO Factor | 1.01 |
| Y2 - ISO Factor | 1.5 |
| Cg - Geometry Factor | 0.174 |
| R - Cone Frontface "To Clear" Radius |
0.060 in 1.50 mm |
| r - Cup Backface "To Clear" Radius |
0.130 in 3.30 mm |
| da - Cone Frontface Backing Diameter |
13.15 in 334 mm |
| Db - Cup Backface Backing Diameter |
15.67 in 398.00 mm |
| Ab - Cage-Cone Frontface Clearance |
0.14 in 3.6 mm |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN LM258648DGW - LM258610 Tapered Roller Bearings - TDI (Tapered Double Inner) in stock.
