TIMKEN M257148DW - M257110 Tapered Roller Bearings
Also known as : M257148DW - M257110
- Inside Diameter: 304.8 mm
- Outside Diameter: 419.1 mm
- Width: 130.175 mm
- Basic dynamic load rating: 2080 kN
- Basic static load rating: 540 kN
TIMKEN M257148DW - M257110 Bearing
TIMKEN M257148DW - M257110 Bearing details
| Bearing Number | M257148DW - M257110 |
|---|---|
| Brand | TIMKEN |
| Type | Tapered Roller Bearings - TDI (Tapered Double Inner) |
| Series | M257100 |
| Cone Part Number | M257148DW |
| Cup Part Number | M257110 |
| Design Units | Imperial |
| Bearing Weight |
113.10 lb 51.300 Kg |
| Cage Type | Stamped Steel |
| Aa - Cage-Cone Backface Clearance |
0 in 0 mm |
| d - Bore |
12 in 304.8 mm |
| D - Cup Outer Diameter |
16.5000 in 419.100 mm |
| B - Double Cone Width |
5.1250 in 130.175 mm |
| C - Cup Width |
2.1250 in 53.975 mm |
| T - Bearing Width across Cups |
5.1250 in 130.175 mm |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
69700 lbf 310000 N |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
468000 lbf 2080000 N |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
121000 lbf 540000 N |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
39700 lbf 176000 N |
| K - Factor | 1.76 |
| e - ISO Factor | 0.7 |
| Y1 - ISO Factor | 0.97 |
| Y2 - ISO Factor | 1.44 |
| Cg - Geometry Factor | 0.167 |
| R - Cone Frontface "To Clear" Radius |
0.130 in 3.30 mm |
| r - Cup Backface "To Clear" Radius |
0.250 in 6.40 mm |
| da - Cone Frontface Backing Diameter |
12.8 in 325.10 mm |
| Db - Cup Backface Backing Diameter |
15.43 in 391.90 mm |
| Ab - Cage-Cone Frontface Clearance |
0.18 in 4.6 mm |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN M257148DW - M257110 Tapered Roller Bearings - TDI (Tapered Double Inner) in stock.
