TIMKEN 16131-16284-B tapered bearings with Flange
Also known as : 16131-16284-B
- Inside Diameter: 33.338 mm
- Outside Diameter: 72.238 mm
- Width: 8.733 mm
- Basic dynamic load rating: 56.6 kN
- Basic static load rating: 65.8 kN
TIMKEN 16131-16284-B Bearing
TIMKEN 16131-16284-B Bearing details
| Series | 16000 |
|---|---|
| model | 16131-16284-B |
| Cone Part Number | 16131 |
| Cup Part Number | 16284-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
0.600 Kg 1.30 lb |
| Dimensions | |
| d - Bore |
33.338 mm 1.3125 in |
| D - Cup Outer Diameter |
72.238 mm 2.8440 in |
| D1 - Flange Outer Diameter |
76.098 mm 2.9960 in |
| B - Cone Width |
20.638 mm 0.8125 in |
| C - Cup Width |
15.875 mm 0.6250 in |
| C1 - Cup Flange Width |
3.970 mm 0.1563 in |
| T - Bearing Width to Flange |
8.733 mm 0.3438 in |
| T1 - Bearing Width |
20.638 mm 0.8125 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
| da - Cone Frontface Backing Diameter |
39.60 mm 1.56 in |
| db - Cone Backface Backing Diameter |
46 mm 1.81 in |
| Da - Cup Frontface Backing Diameter |
69.60 mm 2.74 in |
| Ab - Cage-Cone Frontface Clearance |
1.8 mm 0.07 in |
| Aa - Cage-Cone Backface Clearance |
0.5 mm 0.02 in |
| a - Effective Center Location |
-4.1 mm -0.16 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
14700 N 3300 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
56600 N 12700 lbf |
| C0 - Static Radial Rating |
65800 N 14800 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
10100 N 2270 lbf |
| Factors | |
| K - Factor | 1.45 |
| e - ISO Factor | 0.40 |
| Y - ISO Factor | 1.49 |
| G1 - Heat Generation Factor (Roller-Raceway) | 20.3 |
| G2 - Heat Generation Factor (Rib-Roller End) | 10.6 |
| Cg - Geometry Factor | 0.0707 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 16131-16284-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
TIMKEN bearing cross reference
