TIMKEN 1775-1729-B Bearing

TIMKEN 1775-1729-B tapered bearings with Flange

Also known as : 1775-1729-B

• Inside Diameter: 19.05 mm
• Outside Diameter: 56.896 mm
• Width: 7.455 mm
• Basic dynamic load rating: 45400 kN
• Basic static load rating: 45300 kN

Inquire Now

TIMKEN 1775-1729-B Bearing

Series	1700
model	1775-1729-B
Cone Part Number	1775
Cup Part Number	1729-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.4 lb
Dimensions
d - Bore	19.050 mm 0.7500 in
D - Cup Outer Diameter	56.896 mm 2.2400 in
D1 - Flange Outer Diameter	60.757 mm 2.3920 in
B - Cone Width	19.837 mm 0.7810 in
C - Cup Width	15.875 mm 0.6250 in
C1 - Cup Flange Width	3.962 mm 0.1560 in
T - Bearing Width to Flange	7.455 mm 0.2935 in
T1 - Bearing Width	19.368 mm 0.7625 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.5 mm 0.06 in
r - Cup Backface "To Clear" Radius	0.80 mm 0.030 in
da - Cone Frontface Backing Diameter	24.90 mm 0.98 in
db - Cone Backface Backing Diameter	26.90 mm 1.06 in
Da - Cup Frontface Backing Diameter	53.59 mm 2.11 in
Ab - Cage-Cone Frontface Clearance	2 mm 0.08 in
Aa - Cage-Cone Backface Clearance	0.3 mm 0.01 in
a - Effective Center Location	-6.9 mm -0.27 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	11800 N 2650 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	45400 N 10200 lbf
C0 - Static Radial Rating	45300 N 10200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	6200 N 1390 lbf
Factors
K - Factor	1.9
e - ISO Factor	0.31
Y - ISO Factor	1.95
G1 - Heat Generation Factor (Roller-Raceway)	10.6
G2 - Heat Generation Factor (Rib-Roller End)	5.39
Cg - Geometry Factor	0.0521

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 1775-1729-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.