TIMKEN 36690-36620-B Bearing

TIMKEN 36690-36620-B tapered bearings with Flange

Also known as : 36690-36620-B

• Inside Diameter: 146.05 mm
• Outside Diameter: 193.675 mm
• Width: 9.525 mm
• Basic dynamic load rating: 196 kN
• Basic static load rating: 394 kN

Inquire Now

TIMKEN 36690-36620-B Bearing

Series	36600
model	36690-36620-B
Cone Part Number	36690
Cup Part Number	36620-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	2.300 Kg 5.10 lb
Dimensions
d - Bore	146.050 mm 5.7500 in
D - Cup Outer Diameter	193.675 mm 7.6250 in
D1 - Flange Outer Diameter	197.541 mm 7.7772 in
B - Cone Width	28.575 mm 1.1250 in
C - Cup Width	23.020 mm 0.9063 in
C1 - Cup Flange Width	3.970 mm 0.1563 in
T - Bearing Width to Flange	9.525 mm 0.3750 in
T1 - Bearing Width	28.575 mm 1.1250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	1.5 mm 0.06 in
r - Cup Backface "To Clear" Radius	1.5 mm 0.06 in
da - Cone Frontface Backing Diameter	152.90 mm 6.02 in
db - Cone Backface Backing Diameter	154.90 mm 6.1 in
Da - Cup Frontface Backing Diameter	190.50 mm 7.50 in
Ab - Cage-Cone Frontface Clearance	3.3 mm 0.13 in
Aa - Cage-Cone Backface Clearance	1 mm 0.04 in
a - Effective Center Location	4.8 mm 0.19 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	50900 N 11400 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	196000 N 44200 lbf
C0 - Static Radial Rating	394000 N 88600 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	32100 N 7220 lbf
Factors
K - Factor	1.59
e - ISO Factor	0.37
Y - ISO Factor	1.63
G1 - Heat Generation Factor (Roller-Raceway)	366
G2 - Heat Generation Factor (Rib-Roller End)	121
Cg - Geometry Factor	0.177

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 36690-36620-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.