TIMKEN 390-394AB Bearing

TIMKEN 390-394AB tapered bearings with Flange

Also known as : 390-394AB

  • Inside Diameter: 57.15 mm
  • Outside Diameter: 110 mm
  • Width: 7.925 mm
  • Basic dynamic load rating: 98.9 kN
  • Basic static load rating: 125 kN

Inquire Now


TIMKEN 390-394AB Bearing

TIMKEN 390-394AB Bearing details

Series 395
model 390-394AB
Cone Part Number 390
Cup Part Number 394AB
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.000 Kg
2.10 lb
Dimensions
d - Bore 57.150 mm
2.2500 in
D - Cup Outer Diameter 110.000 mm
4.3307 in
D1 - Flange Outer Diameter 114.673 mm
4.5147 in
B - Cone Width 21.996 mm
0.8660 in
C - Cup Width 18.824 mm
0.7411 in
C1 - Cup Flange Width 4.750 mm
0.1870 in
T - Bearing Width to Flange 7.925 mm
0.3120 in
T1 - Bearing Width 21.999 mm
0.8661 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 2.300 mm
0.090 in
r - Cup Backface "To Clear" Radius 1.30 mm
0.050 in
da - Cone Frontface Backing Diameter 66 mm
2.6 in
db - Cone Backface Backing Diameter 70.1 mm
2.76 in
Da - Cup Frontface Backing Diameter 105.92 mm
4.18 in
Ab - Cage-Cone Frontface Clearance 2.8 mm
0.11 in
Aa - Cage-Cone Backface Clearance 1.3 mm
0.05 in
a - Effective Center Location -0.8 mm
-0.03 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 25600 N
5760 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 98900 N
22200 lbf
C0 - Static Radial Rating 125000 N
28100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 17600 N
3970 lbf
Factors
K - Factor 1.45
e - ISO Factor 0.40
Y - ISO Factor 1.49
G1 - Heat Generation Factor (Roller-Raceway)  
G2 - Heat Generation Factor (Rib-Roller End)  
Cg - Geometry Factor 0.0984

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 390-394AB bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

TIMKEN bearing cross reference

TIMKEN 390A-394AB bearing
63.500mm x 110.000mm x 7.925mm
TIMKEN 390-394D bearing
57.150mm x 110.000mm x 52.385mm
TIMKEN 390-394DC bearing
57.150mm x 110.000mm x 52.385mm
TIMKEN 390-394YD bearing
57.150mm x 110.000mm x 52.385mm
TIMKEN 390A-394D bearing
63.500mm x 110.000mm x 52.385mm
TIMKEN 390A-394DC bearing
63.500mm x 110.000mm x 52.385mm
TIMKEN 390A-394YD bearing
63.500mm x 110.000mm x 52.385mm