TIMKEN 41106-41286-B Bearing

TIMKEN 41106-41286-B tapered bearings with Flange

Also known as : 41106-41286-B

• Inside Diameter: 26.988 mm
• Outside Diameter: 72.626 mm
• Width: 12.7 mm
• Basic dynamic load rating: 82.6 kN
• Basic static load rating: 64.1 kN

Inquire Now

TIMKEN 41106-41286-B Bearing

Series	41000
model	41106-41286-B
Cone Part Number	41106
Cup Part Number	41286-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.500 Kg 1.10 lb
Dimensions
d - Bore	26.988 mm 1.0625 in
D - Cup Outer Diameter	72.626 mm 2.8593 in
D1 - Flange Outer Diameter	78.082 mm 3.0741 in
B - Cone Width	24.257 mm 0.9550 in
C - Cup Width	17.463 mm 0.6875 in
C1 - Cup Flange Width	5.555 mm 0.2187 in
T - Bearing Width to Flange	12.700 mm 0.5000 in
T1 - Bearing Width	24.608 mm 0.9688 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	2.300 mm 0.090 in
r - Cup Backface "To Clear" Radius	1.5 mm 0.06 in
da - Cone Frontface Backing Diameter	36.60 mm 1.44 in
db - Cone Backface Backing Diameter	41.90 mm 1.65 in
Da - Cup Frontface Backing Diameter	71.10 mm 2.80 in
Ab - Cage-Cone Frontface Clearance	3 mm 0.12 in
Aa - Cage-Cone Backface Clearance	2.3 mm 0.09 in
a - Effective Center Location	-4.1 mm -0.16 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	21400 N 4820 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	82600 N 18600 lbf
C0 - Static Radial Rating	64100 N 14400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	22100 N 4960 lbf
Factors
K - Factor	0.97
e - ISO Factor	0.6
Y - ISO Factor	1
G1 - Heat Generation Factor (Roller-Raceway)	13
G2 - Heat Generation Factor (Rib-Roller End)	5.83
Cg - Geometry Factor	0.0686

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 41106-41286-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.