TIMKEN 440-432-B Bearing

TIMKEN 440-432-B tapered bearings with Flange

Also known as : 440-432-B

  • Inside Diameter: 38.1 mm
  • Outside Diameter: 95.25 mm
  • Width: 11.115 mm
  • Basic dynamic load rating: 127 kN
  • Basic static load rating: 144 kN

Inquire Now


TIMKEN 440-432-B Bearing

TIMKEN 440-432-B Bearing details

Series 435
model 440-432-B
Cone Part Number 440
Cup Part Number 432-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.100 Kg
2.40 lb
Dimensions
d - Bore 38.1 mm
1.5 in
D - Cup Outer Diameter 95.250 mm
3.7500 in
D1 - Flange Outer Diameter 100.686 mm
3.9640 in
B - Cone Width 29.901 mm
1.1772 in
C - Cup Width 22.225 mm
0.8750 in
C1 - Cup Flange Width 5.558 mm
0.2188 in
T - Bearing Width to Flange 11.115 mm
0.4376 in
T1 - Bearing Width 27.783 mm
1.0938 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 0.800 mm
0.03 in
r - Cup Backface "To Clear" Radius 2.30 mm
0.090 in
da - Cone Frontface Backing Diameter 45.5 mm
1.79 in
db - Cone Backface Backing Diameter 46.5 mm
1.83 in
Da - Cup Frontface Backing Diameter 87.12 mm
3.46 in
Ab - Cage-Cone Frontface Clearance 1.3 mm
0.05 in
Aa - Cage-Cone Backface Clearance 1 mm
0.04 in
a - Effective Center Location -9.1 mm
-0.36 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 32900 N
7400 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 127000 N
28500 lbf
C0 - Static Radial Rating 144000 N
32400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 16000 N
3600 lbf
Factors
K - Factor 2.05
e - ISO Factor 0.28
Y - ISO Factor 2.11
G1 - Heat Generation Factor (Roller-Raceway) 42.5
G2 - Heat Generation Factor (Rib-Roller End) 11.3
Cg - Geometry Factor 0.0805

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 440-432-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

TIMKEN bearing cross reference

TIMKEN 440-432AB bearing
38.1mm x 92.075mm x 11.115mm
TIMKEN 440-432DC bearing
38.1mm x 95.250mm x 61.915mm
TIMKEN 440-432D bearing
38.1mm x 95.250mm x 61.915mm