TIMKEN 462A-453XB Bearing

TIMKEN 462A-453XB tapered bearings with Flange

Also known as : 462A-453XB

  • Inside Diameter: 57.15 mm
  • Outside Diameter: 107.95 mm
  • Width: 8.738 mm
  • Basic dynamic load rating: 161 kN
  • Basic static load rating: 166 kN

Inquire Now


TIMKEN 462A-453XB Bearing

TIMKEN 462A-453XB Bearing details

Series 455
model 462A-453XB
Cone Part Number 462A
Cup Part Number 453XB
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.200 Kg
2.60 lb
Dimensions
d - Bore 57.150 mm
2.2500 in
D - Cup Outer Diameter 107.95 mm
4.25 in
D1 - Flange Outer Diameter 114.198 mm
4.4960 in
B - Cone Width 29.317 mm
1.1542 in
C - Cup Width 24.605 mm
0.9687 in
C1 - Cup Flange Width 5.558 mm
0.2188 in
T - Bearing Width to Flange 8.738 mm
0.3440 in
T1 - Bearing Width 27.785 mm
1.0939 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 2.300 mm
0.090 in
r - Cup Backface "To Clear" Radius 0.80 mm
0.030 in
da - Cone Frontface Backing Diameter 68.10 mm
2.68 in
db - Cone Backface Backing Diameter 67.10 mm
2.64 in
Da - Cup Frontface Backing Diameter 100.58 mm
3.96 in
Ab - Cage-Cone Frontface Clearance 2 mm
0.08 in
Aa - Cage-Cone Backface Clearance 1.8 mm
0.07 in
a - Effective Center Location -7.1 mm
-0.28 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 41700 N
9370 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 161000 N
36100 lbf
C0 - Static Radial Rating 166000 N
37200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 23900 N
5380 lbf
Factors
K - Factor 1.74
e - ISO Factor 0.34
Y - ISO Factor 1.79
G1 - Heat Generation Factor (Roller-Raceway)  
G2 - Heat Generation Factor (Rib-Roller End)  
Cg - Geometry Factor 0.0946

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 462A-453XB bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.