TIMKEN 53176-53387-B tapered bearings with Flange
Also known as : 53176-53387-B
- Inside Diameter: 44.45 mm
- Outside Diameter: 98.425 mm
- Width: 16.67 mm
- Basic dynamic load rating: 119 kN
- Basic static load rating: 104 kN
TIMKEN 53176-53387-B Bearing
TIMKEN 53176-53387-B Bearing details
| Series | 53000 |
|---|---|
| model | 53176-53387-B |
| Cone Part Number | 53176 |
| Cup Part Number | 53387-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
1.100 Kg 2.30 lb |
| Dimensions | |
| d - Bore |
44.450 mm 1.7500 in |
| D - Cup Outer Diameter |
98.425 mm 3.8750 in |
| D1 - Flange Outer Diameter |
104.673 mm 4.1210 in |
| B - Cone Width |
28.301 mm 1.1142 in |
| C - Cup Width |
20.638 mm 0.8125 in |
| C1 - Cup Flange Width |
6.350 mm 0.2500 in |
| T - Bearing Width to Flange |
16.670 mm 0.6563 in |
| T1 - Bearing Width |
30.958 mm 1.2188 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
1.300 mm 0.050 in |
| r - Cup Backface "To Clear" Radius |
0.80 mm 0.030 in |
| da - Cone Frontface Backing Diameter |
52.60 mm 2.07 in |
| db - Cone Backface Backing Diameter |
58.90 mm 2.32 in |
| Da - Cup Frontface Backing Diameter |
91.95 mm 3.66 in |
| Ab - Cage-Cone Frontface Clearance |
3 mm 0.12 in |
| Aa - Cage-Cone Backface Clearance |
4.8 mm 0.19 in |
| a - Effective Center Location |
-0.3 mm -0.01 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
30800 N 6920 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
119000 N 26700 lbf |
| C0 - Static Radial Rating |
104000 N 23400 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
39000 N 8760 lbf |
| Factors | |
| K - Factor | 0.79 |
| e - ISO Factor | 0.74 |
| Y - ISO Factor | 0.81 |
| G1 - Heat Generation Factor (Roller-Raceway) | 26.7 |
| G2 - Heat Generation Factor (Rib-Roller End) | 9.63 |
| Cg - Geometry Factor | 0.093 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 53176-53387-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
