TIMKEN 655-652-B Bearing

TIMKEN 655-652-B tapered bearings with Flange

Also known as : 655-652-B

  • Inside Diameter: 69.85 mm
  • Outside Diameter: 152.4 mm
  • Width: 16.667 mm
  • Basic dynamic load rating: 247 kN
  • Basic static load rating: 335 kN

Inquire Now


TIMKEN 655-652-B Bearing

TIMKEN 655-652-B Bearing details

Series 655
model 655-652-B
Cone Part Number 655
Cup Part Number 652-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 3.700 Kg
8.20 lb
Dimensions
d - Bore 69.850 mm
2.7500 in
D - Cup Outer Diameter 152.400 mm
6.0000 in
D1 - Flange Outer Diameter 159.441 mm
6.2772 in
B - Cone Width 41.275 mm
1.6250 in
C - Cup Width 31.750 mm
1.2500 in
C1 - Cup Flange Width 7.142 mm
0.2812 in
T - Bearing Width to Flange 16.667 mm
0.6562 in
T1 - Bearing Width 41.275 mm
1.6250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 82 mm
3.23 in
db - Cone Backface Backing Diameter 87.90 mm
3.46 in
Da - Cup Frontface Backing Diameter 141.48 mm
5.57 in
Ab - Cage-Cone Frontface Clearance 2.5 mm
0.1 in
Aa - Cage-Cone Backface Clearance 4.3 mm
0.17 in
a - Effective Center Location -7.9 mm
-0.31 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 64000 N
14400 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 247000 N
55500 lbf
C0 - Static Radial Rating 335000 N
75300 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 44800 N
10100 lbf
Factors
K - Factor 1.43
e - ISO Factor 0.41
Y - ISO Factor 1.47
G1 - Heat Generation Factor (Roller-Raceway) 137
G2 - Heat Generation Factor (Rib-Roller End) 27.3
Cg - Geometry Factor 0.0919

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 655-652-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.