TIMKEN 841-832-B Bearing

TIMKEN 841-832-B tapered bearings with Flange

Also known as : 841-832-B

  • Inside Diameter: 85.725 mm
  • Outside Diameter: 168.275 mm
  • Width: 22.225 mm
  • Basic dynamic load rating: 485 kN
  • Basic static load rating: 522 kN

Inquire Now


TIMKEN 841-832-B Bearing

TIMKEN 841-832-B Bearing details

Series 835
model 841-832-B
Cone Part Number 841
Cup Part Number 832-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 5.40 Kg
11.900 lb
Dimensions
d - Bore 85.725 mm
3.3750 in
D - Cup Outer Diameter 168.275 mm
6.6250 in
D1 - Flange Outer Diameter 177.698 mm
6.9960 in
B - Cone Width 56.363 mm
2.2190 in
C - Cup Width 41.275 mm
1.6250 in
C1 - Cup Flange Width 9.525 mm
0.3750 in
T - Bearing Width to Flange 22.225 mm
0.8750 in
T1 - Bearing Width 53.975 mm
2.1250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 97 mm
3.82 in
db - Cone Backface Backing Diameter 103.90 mm
4.09 in
Da - Cup Frontface Backing Diameter 154.94 mm
6.14 in
Ab - Cage-Cone Frontface Clearance 2.5 mm
0.1 in
Aa - Cage-Cone Backface Clearance 3.3 mm
0.13 in
a - Effective Center Location -18.5 mm
-0.73 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 126000 N
28300 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 485000 N
109000 lbf
C0 - Static Radial Rating 522000 N
117000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 64400 N
14500 lbf
Factors
K - Factor 1.95
e - ISO Factor 0.3
Y - ISO Factor 2
G1 - Heat Generation Factor (Roller-Raceway) 198
G2 - Heat Generation Factor (Rib-Roller End) 34.8
Cg - Geometry Factor 0.0937

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 841-832-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.