TIMKEN 898-892-B tapered bearings with Flange
Also known as : 898-892-B
- Inside Diameter: 139.7 mm
- Outside Diameter: 228.6 mm
- Width: 22.225 mm
- Basic dynamic load rating: 520 kN
- Basic static load rating: 809 kN
TIMKEN 898-892-B Bearing
TIMKEN 898-892-B Bearing details
| Series | 895 |
|---|---|
| model | 898-892-B |
| Cone Part Number | 898 |
| Cup Part Number | 892-B |
| Design Units | Imperial |
| Cage Type | Stamped Steel |
| Bearing Weight |
9.00 Kg 19.800 lb |
| Dimensions | |
| d - Bore |
139.700 mm 5.5000 in |
| D - Cup Outer Diameter |
228.600 mm 9.0000 in |
| D1 - Flange Outer Diameter |
238.023 mm 9.3710 in |
| B - Cone Width |
57.150 mm 2.2500 in |
| C - Cup Width |
44.450 mm 1.7500 in |
| C1 - Cup Flange Width |
9.525 mm 0.3750 in |
| T - Bearing Width to Flange |
22.225 mm 0.8750 in |
| T1 - Bearing Width |
57.150 mm 2.2500 in |
| Abutment and Fillet Dimensions | |
| R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
| r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
| da - Cone Frontface Backing Diameter |
152.90 mm 6.02 in |
| db - Cone Backface Backing Diameter |
160 mm 6.3 in |
| Da - Cup Frontface Backing Diameter |
216.90 mm 8.54 in |
| Ab - Cage-Cone Frontface Clearance |
2 mm 0.08 in |
| Aa - Cage-Cone Backface Clearance |
4.8 mm 0.19 in |
| a - Effective Center Location |
-6.1 mm -0.24 in |
| Basic Load Ratings | |
| C90 - Dynamic Radial Rating (90 million revolutions) |
135000 N 30300 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions) |
520000 N 117000 lbf |
| C0 - Static Radial Rating |
809000 N 182000 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) |
97200 N 21800 lbf |
| Factors | |
| K - Factor | 1.39 |
| e - ISO Factor | 0.42 |
| Y - ISO Factor | 1.43 |
| G1 - Heat Generation Factor (Roller-Raceway) | 430 |
| G2 - Heat Generation Factor (Rib-Roller End) | 78.2 |
| Cg - Geometry Factor | 0.135 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 898-892-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
