TIMKEN EE126097-126150-B Bearing

TIMKEN EE126097-126150-B tapered bearings with Flange

Also known as : EE126097-126150-B

• Inside Diameter: 244.475 mm
• Outside Diameter: 381 mm
• Width: 34.925 mm
• Basic dynamic load rating: 907 kN
• Basic static load rating: 1690 kN

Inquire Now

TIMKEN EE126097-126150-B Bearing

Series	126000
model	EE126097-126150-B
Cone Part Number	EE126097
Cup Part Number	126150-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	31.900 Kg 70.300 lb
Dimensions
d - Bore	244.475 mm 9.6250 in
D - Cup Outer Diameter	381.000 mm 15.0000 in
D1 - Flange Outer Diameter	393.598 mm 15.4960 in
B - Cone Width	76.200 mm 3.0000 in
C - Cup Width	57.150 mm 2.2500 in
C1 - Cup Flange Width	12.700 mm 0.5000 in
T - Bearing Width to Flange	34.925 mm 1.3750 in
T1 - Bearing Width	79.375 mm 3.1250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	6.400 mm 0.25 in
r - Cup Backface "To Clear" Radius	4.80 mm 0.190 in
da - Cone Frontface Backing Diameter	265.90 mm 10.47 in
db - Cone Backface Backing Diameter	275.10 mm 10.83 in
Da - Cup Frontface Backing Diameter	361.95 mm 14.25 in
Ab - Cage-Cone Frontface Clearance	3.3 mm 0.13 in
Aa - Cage-Cone Backface Clearance	12.4 mm 0.49 in
a - Effective Center Location	9.7 mm 0.38 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	235000 N 52900 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	907000 N 204000 lbf
C0 - Static Radial Rating	1690000 N 381000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	208000 N 46800 lbf
Factors
K - Factor	1.13
e - ISO Factor	0.52
Y - ISO Factor	1.16
G1 - Heat Generation Factor (Roller-Raceway)	1320
G2 - Heat Generation Factor (Rib-Roller End)	169
Cg - Geometry Factor	0.164

As TIMKEN bearing distributor, Nodes bearings have TIMKEN EE126097-126150-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.