TIMKEN EE333137-333197-B Bearing

TIMKEN EE333137-333197-B tapered bearings with Flange

Also known as : EE333137-333197-B

• Inside Diameter: 349.25 mm
• Outside Diameter: 501.65 mm
• Width: 34.925 mm
• Basic dynamic load rating: 1350 kN
• Basic static load rating: 2780 kN

Inquire Now

TIMKEN EE333137-333197-B Bearing

Series	333000
model	EE333137-333197-B
Cone Part Number	EE333137
Cup Part Number	333197-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	54.40 Kg 119.800 lb
Dimensions
d - Bore	349.250 mm 13.7500 in
D - Cup Outer Diameter	501.650 mm 19.7500 in
D1 - Flange Outer Diameter	515.838 mm 20.3086 in
B - Cone Width	84.138 mm 3.3125 in
C - Cup Width	69.850 mm 2.7500 in
C1 - Cup Flange Width	14.288 mm 0.5625 in
T - Bearing Width to Flange	34.925 mm 1.3750 in
T1 - Bearing Width	90.488 mm 3.5625 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	6.400 mm 0.25 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	372.10 mm 14.65 in
db - Cone Backface Backing Diameter	382 mm 15.04 in
Da - Cup Frontface Backing Diameter	488.40 mm 19.23 in
Ab - Cage-Cone Frontface Clearance	4.6 mm 0.18 in
Aa - Cage-Cone Backface Clearance	10.9 mm 0.43 in
a - Effective Center Location	3.6 mm 0.14 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	350000 N 78700 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	1350000 N 304000 lbf
C0 - Static Radial Rating	2780000 N 626000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	220000 N 49500 lbf
Factors
K - Factor	1.59
e - ISO Factor	0.37
Y - ISO Factor	1.63
G1 - Heat Generation Factor (Roller-Raceway)	3040
G2 - Heat Generation Factor (Rib-Roller End)	337
Cg - Geometry Factor	0.193

As TIMKEN bearing distributor, Nodes bearings have TIMKEN EE333137-333197-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.